Illustration 1 | g00945609 |
Alternate Exit (1)
This message is located on the ROPS support assembly behind the operator and to the right of the operator.
Illustration 2 | g00907967 |
If the primary exit is blocked, use the hammer to break the window. Exit the machine through the window.
Secure Radio (2)
This message is located on the overhead instrument panel.
Illustration 3 | g00907584 |
NOTICE |
---|
Radio must be fastened securely to prevent falling out during rough machine operation or overturn. Radio mounting to DIN sleeve or bracket(s) must withstand 270 N (60 lb) minimum pulling force to resist shock loads. |
Do Not Weld the ROPS. (3)
This message is located on the ROPS support assembly behind the operator and to the right of the operator.
Illustration 4 | g00906117 |
Do not weld the ROPS. Do not drill the ROPS. Read the service manual before you perform any work on the ROPS.
Air Conditioner (4)
This message is located on the discharge line of the air conditioner compressor.
Illustration 5 | g00924082 |