Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
Show/hide table
Required Tools     | ||
---|---|---|
Part Number     | Part Description     | Qty     |
6V-7830     | Tetragauge group     | 1     |
- Attach the gauge to pressure tap (N) .
Show/hide table
Illustration 1 | g00887536 |
CBF1-299 CCG1-399 ALH1-734 CBJ1-399 ALR1-634 |
Show/hide table
Illustration 2 | g01167293 |
CBF300-UP CCG400-UP ALH735-UP CBJ400-UP ALR635-UP |
- Warm the transmission oil to operating temperature.
- Run the engine at HIGH IDLE. Fully depress the brake pedal. Disengage the parking brake. Put the torque converter in a stalled condition with the transmission in third speed forward. Note the pressure on the gauge. The pressure should be 410 ± 50 kPa (60 ± 7.5 psi).
Note: This pressure pertains to a test that is done on the machine. The 410 ± 50 kPa (60 ± 7.5 psi) is not a bench test specification.
- If the pressure that is observed is not 410 ± 50 kPa (60 ± 7.5 psi), perform the following steps:
- Shut off the engine.
- Remove the torque converter outlet relief valve. Refer to Power Train Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Remove" for your machine.
Show/hide table
Table 2 SPACER CHART
Pressure Change To The Valve By Removal Or Addition Of One Spacer    Part Numbers for Spacers (2)     Thickness     Change in Pressure     Location     4M-1751 Spacer    
0.40 mm (0.016 inch)    
19 kPa (2.7 psi)    Torque Converter Outlet Relief Valve (J)     5S-7001 Spacer    
0.90 mm (0.035 inch)    
40 kPa (6.0 psi)    
- Add spacers (1) or remove spacers (1) , as needed. Refer to Power Train Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Dissassemble" for your machine. Refer to Table 3 for the specifications for the spacers.
Show/hide tableIllustration 3 g00839524
Torque converter outlet relief valve
- Assemble the torque converter relief valve. Refer to Power Train Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Assemble" for your machine.
- Install the torque converter relief valve. Refer to Power Train Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Install" for your machine.
- Repeat Steps 3 and 4.
Caterpillar Information System:
2002/06/03 Underground Articulated Trucks are now Shipped with TDTO SAE 30W Oil {1000, 7000, 7581}
2002/06/03 New Clamps Improve Scavenge Pump Tube Service Life {3016, 3154}
D5N Track-Type Tractor Power Train Relief Valve (Transmission) - Test and Adjust
D6N Track-Type Tractor Power Train Pressure Charts
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Data Link
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0096 - FMI 04
D5N Track-Type Tractor Power Train General Testing and Adjusting Information
D5N Track-Type Tractor Power Train Visual Inspection
545 Wheel Skidder Window Washer Reservoir - Fill
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1711 - FMI 04
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1757 - FMI 03
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill Compactor Power Train MID 081 - CID 1711 - FMI 03
D5N Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) Pressure - Test and Adjust
D5N Track-Type Tractor Power Train Priority Valve - Test and Adjust
2002/06/03 Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
D5N Track-Type Tractor Power Train Speed Sensor - Adjust
D5N Track-Type Tractor Power Train Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0070 - FMI 04
IT28G Integrated Toolcarrier and 928G Wheel Loader Hydraulic System General Information
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0177 - FMI 03
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0177 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0426 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0473 - FMI 04
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0177 - FMI 08