Water Pump - Install - Engine in Chassis
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
- Install O-ring seal (16) on water pump (12) .
Show/hide table
Illustration 1 | g00795162 |
- Install water pump (12) in position and install five bolts (15) .
Show/hide table
Illustration 2 | g00795150 |
- Install cover (14) and install three bolts (13) .
- Install the O-ring seal between water pump (12) and water pump cover (10) .
Show/hide table
Illustration 3 | g00795100 |
- Install water pump cover (10) and install four bolts (11) .
- Install hose (9) and tighten hose clamp (8) .
- Install bonnet (7) and install two bolts (5) .
Show/hide table
Illustration 4 | g00795090 |
- Install bolt (4) which secures bonnet (7) to bracket (6) .
- Install hose (3) and tighten the hose clamp.
Show/hide table
Illustration 5 | g00795087 |
- Install hose (2) and tighten the hose clamp.
- Install two hoses (1) and tighten the hose clamps.
- Fill the cooling system. The capacity of the cooling system is 81 L (21 US gal). Refer to Operation and Maintenance Manual, SEBU7362, "980G Series II Wheel Loader", "Cooling System Coolant (ELC) - Change".
- Close the engine side panel on the left side of the machine.
- Close the engine hood.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
D8R Series II Track-Type Tractor Hydraulic System Ripper Lift Control Valve
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
3456 Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0667 - FMI 02
621G and 627G Wheel Tractor-Scrapers Machine Systems Fan Motor (Air Conditioner and Heater) - Remove and Install
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0666 - FMI 02
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0665 - FMI 02
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0664 - FMI 02
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0663 - FMI 02
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0662 - FMI 02
621G and 627G Wheel Tractor-Scrapers Machine Systems Heater Coil - Remove and Install
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0661 - FMI 02
D8R Series II Track-Type Tractor Hydraulic System Ripper Tip Control Valve
966G Wheel Loader and 972G Wheel Loader Hydraulic System Piston Motor (Hydraulic Fan)
2001/05/07 Correction to Operation and Maintenance Manual , "Lubricant Viscosity and Refill Capacities" {0645}
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Transmission Control (Shift Lever)
2001/05/14 Correction to the Plate and Film Group in the Parts Manual of Wheel Loaders {7405, 7557}
621G and 627G Wheel Tractor-Scrapers Machine Systems Cab - Install
2003/12/29 New Process for Reporting Incidents {0337}
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Piston Pump (Hydraulic Fan)
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Solenoid Valve (Hydraulic Lockout)
980G Series II Wheel Loader Engine Supplement Belt Tensioner - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Solenoid Valve (Pilot Proportioning)
621G and 627G Wheel Tractor-Scrapers Machine Systems Seat - Remove and Install