Product Identification Numbers (PIN) Location Guide Caterpillar


Power Module

Usage:

SR4BHV ADT



Illustration 1g00791378

PIN Plate (1) is located on the front side of the generator terminal box.

The serial number plate (2) for the generator is located on top of the generator housing.

The serial number plate (3) for the engine is located on the left side of the cylinder block near the rear of the engine.

Caterpillar Information System:

Product Identification Numbers (PIN) Location Guide Stump Grinder
3054 Engine Fuel System - Prime
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Crankcase Breather - Clean
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Air Precleaner - Clean
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Assemble
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
3054 Engine Finding Top Center Position for No. 1 Piston
980G Series II Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Install
3054 Engine Fuel System Pressure - Test
3054 Engine Air Inlet Heater - Test
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Drive Shaft Support Bearing - Lubricate
2003/11/17 A New Angling Cylinder Is Now Used {5101}
Product Identification Numbers (PIN) Location Guide Vibratory Compactor (Work Tool)
3054 Engine Fuel Injection Nozzle - Test
Product Identification Numbers (PIN) Location Guide Trencher
3054 Engine Automatic Timing Advance Unit - Test
621G and 627G Wheel Tractor-Scrapers Machine Systems Hydraulic Tank - Remove
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1705 - FMI 03
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Oil (High Speed) and Oil Filter - Change - If Equipped
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1705 - FMI 05
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Electronic Control Module (Autoshift)
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1705 - FMI 06
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1706 - FMI 03
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.