Engine Crankcase Breather - Clean
Show/hide table
| |
| Illustration 1 | g00791169 |
The crankcase breather is located on the top of the engine on the right side.
- Remove the four bolts that hold the breather onto the cover. Remove the breather.
- Check the condition of the cover seal. Replace the seal if the seal is damaged.
- Wash the breather and the filter element in a clean nonflammable solvent.
- Shake the breather or use pressure air in order to dry the breather.
- Inspect the hose for damage. Replace the hose if it is necessary.
- Install the breather assembly. Install the hose and install the hose clamp.
- Close the access door.
Caterpillar Information System:
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Air Precleaner - Clean
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Assemble
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
3054 Engine Finding Top Center Position for No. 1 Piston
980G Series II Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Install
3054 Engine Fuel System Pressure - Test
3054 Engine Air Inlet Heater - Test
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Drive Shaft Support Bearing - Lubricate
2003/11/17 A New Angling Cylinder Is Now Used {5101}
2001/04/23 The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
980G Series II Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Remove
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Drive Shaft Spline (Center) - Lubricate
3054 Engine Fuel System - Prime
Product Identification Numbers (PIN) Location Guide Stump Grinder
Product Identification Numbers (PIN) Location Guide Power Module
Product Identification Numbers (PIN) Location Guide Vibratory Compactor (Work Tool)
3054 Engine Fuel Injection Nozzle - Test
Product Identification Numbers (PIN) Location Guide Trencher
3054 Engine Automatic Timing Advance Unit - Test
621G and 627G Wheel Tractor-Scrapers Machine Systems Hydraulic Tank - Remove
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1705 - FMI 03
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Oil (High Speed) and Oil Filter - Change - If Equipped
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems MID 079 - CID 1705 - FMI 05
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System Electronic Control Module (Autoshift)