1984/02/06 Caterpillar

New Service Tools Available {0600}

Usage:

SUPPLEMENT: 03/26/84

SERVICE MAGAZINE, FEBRUARY 6, 1984, PAGE 1. The tool chart on the front page lists a Special Instruction which is available for the FT1794 Crankshaft Main Bearing Removal Tool Group. The correct form number for this Special Instruction is SMHS8331. Please make a note of this on the tool chart.

--------------- END SUPPLEMENT ---------------

The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.

Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction form number is shown in the last column of the chart along with the Tool Announcement form number.

Dealers in the U.S.A. and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Departments.

Caterpillar Tractor Co.
Service G.O. Print Room
Pioneer Park
600 W. Washington Street
East Peoria, IL 61630
Phone: 309-675-0515

Caterpillar Information System:

1984/01/30 Larger Capacity Oil Pan Permits Longer Oil Change Interval{1302,1307}

1984/01/30 Modification May Be Necessary To 6V4902 Hose Press Tool{0623,0624,0665}

1984/01/30 3406B Engines Available{1000}

1984/01/30 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group{1259}

1984/01/30 New Water Temperature Regulator Helps Prevent Engine Overcooling{1355}

1984/01/23 New Overhaul Kit For Sea Water Pump Has Improved Impeller{1364}

1984/01/23 Remanufactured Connecting Rod Assemblies{1218}

1984/01/23 Housing Assembly Now Has Sleeve To Prevent Housing Damage{3306}

1984/01/23 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal{1361}

1984/01/16 New Cover And Lever Will Prevent Overtravel Of Valve Spool {3313}

1984/01/09 Drive Block Retainer Plates Are No Longer Used{3305}

1984/01/09 Parts Service Information For Pistons{1214,1225}

1984/02/06 Correct Oil Pressure Setting For Marine Transmissions {3353,3354}

1984/02/06 New Cylinder Head Assembly Made With A Different Material {1101}

1984/02/06 New Water Pump Groups Have Improved Impellers And Shafts {1361,1364,1389}

1984/02/06 Product Information System Available On Dealer Terminal System (DTS) For U.S. And Canadian Dealers {0371}

1984/02/06 Longer Seat Belts Can Be Installed If Necessary {7327}

1984/02/06 New And Revised Special Instructions Will Have Reference Literature Listed On The Front Page {0374}

1984/02/06 Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}

1984/02/13 Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1318,1306}

1984/02/13 Some Crankshafts Must Be Tufftride Hardened After A Regrind{1202}

1984/02/13 New Service Center For 6V2192 Injection Transducer{0651}

1984/02/13 Remanufactured Cylinder Head Assemblies{1100,1101}

1984/02/13 Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow{1252}