Engine Oil Filter Base
Type 1
Show/hide table
 | |
| Illustration 1 | g00509553 |
(1) 4N-8150 Spring
- Length under test force ... 55.25 mm (2.175 inch)
- Test force ... 76 ± 5 N (17.0 ± 1.1 lb)
- Free length after test ... 93.7 mm (3.69 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- The filter and the cooler bypass valves will open with the following pressure difference. ... 255 ± 20 kPa (37 ± 3 psi)
- Test force ... 76 ± 5 N (17.0 ± 1.1 lb)
(2) Stud
- Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 8.0 mm (0.32 inch)
- Tighten the stud to the following torque. ... 80 ± 14 N·m (60 ± 10 lb ft)
Type 2
Show/hide table
 | |
| Illustration 2 | g00286386 |
(1) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.5 ± 1.5 mm (0.41 ± 0.06 inch)
Tighten the stud to the following torque. ... 68 ± 7 N·m (50 ± 5 lb ft)
Show/hide table
 | |
| Illustration 3 | g00434201 |
View A-A | |
(2) 4N-8150 Spring
- Length under test force ... 55.25 mm (2.175 inch)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
- Free length after test ... 93.7 mm (3.69 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- The filter and the cooler bypass valves will open with the following pressure difference. ... 255 ± 20 kPa (37 ± 3 psi)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
(3) Tighten the plug to the following torque. ... 100 ± 15 N·m (74 ± 11 lb ft)
Caterpillar Information System:
627G and 637G Wheel Tractor-Scrapers Power Train Electronic Control System MID 031 - CID 1326 - FMI 02
3406E and 3456 Engines for Caterpillar Built Machines Camshaft
627G and 637G Wheel Tractor-Scrapers Power Train Electronic Control System MID 031 - CID 1323 - FMI 06
627G and 637G Wheel Tractor-Scrapers Power Train Electronic Control System MID 031 - CID 1323 - FMI 05
627G and 637G Wheel Tractor-Scrapers Power Train Electronic Control System MID 031 - CID 1323 - FMI 03
966F Series II Wheel Loader Power Train Torque Converter
D5N Track-Type Tractor Plate Locations and Film Locations
D8R Series II Track-Type Tractor Power Train Steering Differential and Brake - Assemble
G3304 and G3306 Engines Flywheel Housing - Inspect
D8R Series II Track-Type Tractor Window Wiper and Washer Control
D8R Series II Track-Type Tractor Power Train Steering Differential and Brake - Disassemble
621G, 623G, 627G, 631G and 637G Wheel Tractor-Scrapers Caterpillar Monitoring System Normal Mode
966F Series II Wheel Loader Power Train Torque Converter and Pump Drive Housing
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pilot Control Actuator (Bowl)
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pilot Control Actuator (Ejector)
3406E and 3456 Engines for Caterpillar Built Machines Engine Oil Pump
545 Wheel Skidder Hydraulic and Steering System Resolver Valve - Test
621G, 623G, 627G, 631G and 637G Wheel Tractor-Scrapers Power Train Electronic Control System Position Sensor (Transmission Gear)
966F Series II Wheel Loader Power Train Transmission Oil Pump
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Electrical Component and Connector Locations
3408E and 3412E Engines for Caterpillar Built Machines Ether Injection System - Test
3406E and 3456 Engines for Caterpillar Built Machines Engine Oil Pan
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
621G, 623G, 627G, 631G and 637G Wheel Tractor-Scrapers Caterpillar Monitoring System Service Mode