40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
- Caterpillar Products:
- All
- 3500 Family Pumpers
- 3500 and 3500B Family Generator Sets and Power Modules with Standard Displacement
- Engines with ACERT Technology
- Equipped with Air Compressors
- Caterpillar Products: All
- 3500B Engines
- Commercial and Truck Engines:
- 3176
- 3406E
- C-10
- C-12
- C-15
- C-16
- Electric Power Generation:
- All
- Engine: Commercial
- 3500 and 3500B Family All
- All Diesel
- G3500 Family All
- Engine: Industrial, Marine, and Generator Set that Use Flash Programming
- All
- Engine: Marine
- 3500 Series
- Engine: Truck
- All
- Engine:
- All Commercial Gas Engines
- G3600
- Industrial Engine: with Turbochargers
- All
- Marine Engine: with Turbochargers
- All
- Pumper: All
- Utility Mounted
Show/hide table
Illustration 1 | g01206787 |
262-8390 Microscope |
Show/hide table
Illustration 2 | g01206759 |
Microscope reticle |
Dealer Service Tools now offers the 262-8390 Microscope for inspecting the bearing journals on the engine crankshafts for all Caterpillar machine and engine products. The new microscope is recommended for checking the journal surfaces after a magnetic inspection has been performed. This 40 power microscope is a good general usage instrument that is equipped with a light. The microscope's reticle indicates in 0.5 mm (0.02 inch) increments for accurate measurements. The 262-8390 Microscope replaces the 6V-2196 Microscope and the 6V-7894 Microlite which are cancelled.
Caterpillar Information System:
C13 and C15 On-highway Engines Engine Misfires, Runs Rough or Is Unstable
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056} Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
3500 Generator Sets Starting the Engine
C13 and C15 On-highway Engines Engine Cranks but Does Not Start
3406E and C15 Marine Engines Safety Messages
C13 and C15 On-highway Engines Cooling Fan Is Always ON
G3400 Engines (EIS) Short Spark Plug Life
G3400 Engines (EIS) Poor Fuel Consumption
G3400 Engines (EIS) Mechanical Noise (Knock) in Engine
G3400 Engines (EIS) Low Power/Poor or No Response to Throttle
G3400 Engines (EIS) Intermittent Engine Shutdown
G3400 Engines (EIS) Inlet Air Temperature (High)
G3400 Engines (EIS) Diagnostic Codes
C280 Marine and Petroleum Engines Crankcase Breather
3500 Generator Sets Fuel System Primary Filter/Water Separator - Drain
C9 Engines for Caterpillar Built Machines Fan Drive - Install
C9 Engines for Caterpillar Built Machines Fan Drive - Disassemble
G3400 Engines (EIS) Control Module Self Test
3606 and 3608 Engines Cylinder Block
C9 Engines for Caterpillar Built Machines Fan Drive - Assemble
3618 Engine Refill Capacities and Recommendations
C27 and C32 Engines Air Inlet and Exhaust System - Inspect
G3400 Engines (EIS) Electrical Power Supply
C4.4 Marine Generator Set Engines Fuel Priming Pump and Fuel Filter Base - Remove and Install