Piston Cooling Jet
Note: Piston cooling jets are installed on turbocharged engines only.
Show/hide table
 | |
| Illustration 1 | g00721168 |
(1) Banjo bolt
- Tighten the banjo bolt for the piston cooling jet to the following torque. ... 27 N·m (20 lb ft)
(2) Piston cooling jet
Alignment
Show/hide table
| Required Tools | ||
| Part Number | Part Name | Qty |
| FT-2736 | Alignment Gauge | 1 |
Show/hide table
 | |
| Illustration 2 | g00712686 |
To align the piston cooling jet, use the following procedure:
- Build an alignment gauge (4) out of 3 mm (0.12 inch) plexiglass. For the correct dimensions, see the print for FT-2736 Alignment Gauge .
- Install the alignment gauge on pins (1) of the cylinder head.
- Insert a rod (2) that is 1.2 mm (0.05 inch) in diameter into each piston cooling jet. The rods must protrude through holes (3) in order for the piston cooling jet to be aligned properly. If the rods do not protrude through the holes in the alignment tool, bend the piston cooling jet. Check the rods again for correct alignment.
- Remove the alignment gauge and the rods.
Caterpillar Information System:
963B Track-Type Loader Ripping
910G HYSTAT Wheel Loader Hydraulic Hand Control (Single Function Lever)
525B and 535B Wheel Skidders Power Train Torque Converter - Assemble
525B and 535B Wheel Skidders Power Train Torque Converter - Disassemble
525B and 535B Wheel Skidders Power Train Torque Converter from Transmission - Separate
525B and 535B Wheel Skidders Power Train Torque Converter and Transmission - Remove
525B and 535B Wheel Skidders Power Train Transmission Hydraulic Control Valve - Install
988G Wheel Loader Machine Systems Selector and Pressure Control Valve (Steering) - Remove and Install
525B Wheel Skidder and 535B Wheel Skidder Power Train Front Axle Support
525B and 535B Wheel Skidders Power Train Transmission Hydraulic Control Valve - Assemble
973C Track-Type Loader Power Train Pump Drive - Install
525B Wheel Skidder and 535B Wheel Skidder Power Train Dump Valve (Transmission)
963B Track-Type Loader Basement Excavation
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
525B Wheel Skidder and 535B Wheel Skidder Power Train Output Transfer Gears
525B and 535B Wheel Skidders Power Train Transmission - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 03 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 04 Pressure Sensor (Fixed Displacement Pump Oil) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0767 FMI 06 Pressure Sensor (Fixed Displacement Pump Oil) Current Above Normal - Test
651E and 657E Wheel Tractor-Scrapers Air System and Brakes Performance Checks
988G Wheel Loader Machine Systems Thermostatic Valve (Hydraulic Fan) - Remove and Install
525B Wheel Skidder and 535B Wheel Skidder Power Train Selector and Pressure Control Valve (Transmission)
525B Wheel Skidder and 535B Wheel Skidder Power Train Solenoid Valve (Clutch)
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0051</B> Generator through <B>5N-0075</B> Generator