 | |
| Illustration 1 | g00736407 |
(1) Torque for four bolts ... 1800 ± 200 N·m (1325 ± 145 lb ft)
(2) Torque for eight bolts ... 900 ± 100 N·m (665 ± 75 lb ft)
 | |
| Illustration 2 | g00718675 |
(3) Torque for eight bolts ... 530 ± 70 N·m (390 ± 50 lb ft)
(4) Thickness of new thrust washer ... 6.32 ± 0.03 mm (.249 ± .001 inch)
(5) Thickness of new thrust plate ... 20.90 ± 0.05 mm (.823 ± .002 inch)
Depth of bore in frame assembly ... 34.10 ± 0.20 mm (1.342 ± .008 inch)
(6) Inside diameter of frame assembly ... 139.700 ± 0.038 mm (5.5000 ± .0015 inch)
Outside diameter of bearing ... 139.802 ± 0.013 mm (5.5040 ± .0005 inch)
(7) Diameter of trunnion ... 126.847 ± 0.038 mm (4.9940 ± .0015 inch)
Inside diameter of bearing ... 127.185 ± 0.020 mm (5.0073 ± .0008 inch)
Install two lip seals (8) into the axle housing. Orient the seals toward the rear of the machine.