Locations
Illustration 1 | g00690742 |
The steering motor is located under the floorplates in the operator's station. (1) Steering motor (A) Pressure tap for the right steering loop (B) Pressure tap for the left steering loop |
Illustration 2 | g00773840 |
The pressure control valve is mounted on top of the main case below the seat. (2) Pressure control valve (C) Pressure tap for the discharge pressure of the charge pump (D) Pressure tap for the return line to the case (R) Pressure tap for the discharge pressure of the implement pump |
Illustration 3 | g00690746 |
The steering pump is below the floorplates in the operator's station. (3) Steering pump (E) Pressure tap for the signal pressure of the Left Steer position (F) Pressure tap for the signal pressure of the Right Steer position |
Illustration 4 | g00690814 |
The steering oil filter is located in the compartment on the left fender. (4) Steering oil filter (G) Pressure tap for the inlet of the filter (H) Pressure tap for the outlet of the filter |
Illustration 5 | g00799911 |
The pressure taps for the steering pilot valve are located under the left console below the steering tiller. (J) Pressure tap for the Left Steer pilot signal (K) Pressure tap for the Right Steer pilot signal |
Illustration 6 | g00690848 |
The hydraulic oil cooler is located on the left side of the engine behind the fan. (7) Hydraulic oil cooler (L) Pressure tap for the hydraulic oil cooler outlet |
Illustration 7 | g00690818 |
The compensator valve is part of the implement pump, which is located below the floorplates in the operator's station. (14) Implement pump (P) Pressure tap for the signal pressure of the implement pump |
Illustration 8 | g00773841 |
The pressure tap for the pilot oil supply is located on the right fender. (U) Pressure tap for the pilot oil supply |