Required Tools
Show/hide table
| 所需工具 | |
|---|---|
| 零件号 | 零件描述 |
| 208-1316 | 制冷剂维修装置（回收/回收利用/重新加注） (110 V / 60 Hz) |
| 197-1915 | 制冷剂维修装置 (230 V / 50/60 Hz) |
| 208-1323 | 制冷剂维修装置（回收/回收利用/重新加注） (115 V / 60 Hz) |
| 208-1326 | 制冷剂维修装置（回收/回收利用/重新加注） (220-240 V / 50 Hz) |
| 168-1959 | 电子加注台秤 (115 V / 60 Hz) |
| 168-1961 | 电子加注台秤 (220-240 V / 50 Hz) |
| 168-1958 | 电子加注台秤 (蓄电池) |
| 208-1317 | 制冷剂干燥和接收罐 |
| 208-1341 | 歧管仪表组 |
| 208-1353 | 热敏电阻压力计 |
| 4C-2964 | 制冷剂检漏仪 |
| 9U-6494 | 制冷剂油喷射器 |
| 445-9425 | 制冷剂维修装置 (回收) |
| 208-1319 | 制冷剂罐 (22.7 kg（50 lb）) |
| 208-1381 | 真空泵 (1.2 CFM，110 V / 60 Hz) |
| 208-1556 | 真空泵 (4 CFM，110V / 60Hz) |
| 208-1382 | 真空泵 (1.2 CFM，220 V / 50-60 Hz) |
| 208-1357 | 真空泵 (4 CFM，220-250 V / 50-60 Hz) |
| 1U-9763 | 真空泵油 |
| 1U-8085 | 护目镜 (通风) |
| 208-1331 | 制冷剂加注软管 |
| 208-1333 | 制冷剂软管 |
| 208-1332 | 制冷剂软管 |
| 208-1340 | 制冷剂连接器 (高压) |
| 208-1339 | 制冷剂连接器 (低压) |
| 5P-7277 | 电压测试仪 |
| 8T-0500 | 导通性测试仪 |
| 9U-5325 | 温度计 |
| 138-6629 | 制冷剂识别器 (110/220 Volt 60/50 Hz) |
| 174-0839 | 制冷剂分析仪工具总成 |
| 153-8537 | 空调冲洗装置 (手推车) |
| 153-9032 | 空调冲洗装置 (便携式) |
| 153-9033 | 适配器套件 (空调冲洗) |
| 153-8538 | 制冷剂冲洗液 |
| 9U-7804 | O 形圈套件 |
| 192-4723 | 染色剂注入工具总成 |
| 192-2331 | 泄漏检测指示灯总成 |
| 192-4727 | 染色剂清洗液 |
| 208-1375 | 节流孔工具总成 |
| 8T-9275 | 散热器工具总成 |
Caterpillar Information System:
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Recovery
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Flush
3412E Petroleum Engine CID 0110 FMI 04 Engine Coolant Temperature short to ground
3412E Petroleum Engine CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3508B, 3512B and 3516B Generator Set Engines Balancer Group (Front) - Remove and Install - 3508B Engine
C11 and C15 Engines for Caterpillar Built Machines E096 High Fuel Pressure
2013/09/02 A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
C32 Marine Engines Event Codes
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
3508B, 3512B and 3516B Generator Set Engines Engine Oil Sequence Valves - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Compressor Oil - Check
C4.4 Industrial Engine Overspeed
C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Factory Passwords
3412E Petroleum Engine CID 1835 FMI 03 Auxiliary Pressure Sensor open/short to +batt
3412E Petroleum Engine CID 1835 FMI 04 Auxiliary Pressure Sensor short to ground
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Remove
3508C, 3512C and 3516C Marine Engines Engine Oil Cooler - Install
3306B Industrial Engine Emergency Stopping
3500B Marine Propulsion Engines Auxiliary Water Pump - Inspect