Correct Wiring Diagrams Have Been Identified for 480 Volt Sensing VR3 to VR6 Regulator Conversion {4467}
- Engine:
- 3512 (S/N: 24Z1-UP)
- 3516 (S/N: 25Z1-UP)
- G3516 (S/N: 4EK1-UP)
When converting a 3500 Genset from a 480 Volt Sensing VR3 Regulator to a 240 Volt Sensing VR6 Regulator, use the wiring diagrams shown in Table 1.
For self-excited generators, 242-9702 Voltage Regulator Gp is the the Cancel Replace By (CRB) for 149-6131 Regulator .
For permanent magnet generators, 242-9703 Voltage Regulator Gp is the Cancel Replace By (CRB) for 155-3819 Voltage Regulator As .
For retrofit instructions, refer to Special Instruction, REHS2505, "VR6B Regulator Installation for 3500 Generator Sets".
Show/hide table
Correct Wiring Diagrams for VR3 to VR6 Conversion     | |
Regulator Group     | Wiring Diagram     |
242-9702 Voltage Regulator Gp     | 267-1448 Wiring Diagram     |
242-9703 Voltage Regulator Gp     | 267-1449 Wiring Diagram     |
Caterpillar Information System:
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Remove
3126B Petroleum Engine Diagnostic Code Cross Reference
3508C, 3512C and 3516C Marine Engines Flywheel - Remove and Install
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Assemble
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Disassemble
345C Excavator Machine System Specifications Boom
345C Excavator Machine System Specifications Final Drive
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
568 Forest Machine Machine System Specifications Recoil Spring
C9 Marine Generator Set Product Lifting
C32 Marine Engines System Configuration Parameters
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
C7.1 Industrial Engine Engine Stopping
C4.4 Industrial Engine Electrical System
C11 and C13 Engines for Caterpillar Built Machines General Information
C11 and C13 Engines for Caterpillar Built Machines Lubrication System
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
3126B Petroleum Engine Injection Actuation Pressure - Test
C6.6 Industrial Engine Model View Illustrations
3500 and 3500B Engines Reference Numbers
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick
345C Excavator Machine System Specifications Stick - 3.0 m (9.84 ft)