568 Forest Machine Machine System Specifications Caterpillar


Recoil Spring

Usage:

568 FM LL BRB



图 1g01940933

(1) 194-1253 弹簧

在试验力下的长度 ... 785.0 ± 1.0 mm (30.91 ± 0.04 in)
试验力 ... 280500 ± 24000 N (63060 ± 5390 lb)
试验后的自由长度 ... 957.9 mm (37.71 in)
外径 ... 246 mm (9.7 in)

(2) 在 2 只螺栓的螺纹上涂抹 4C-4030 螺纹固定剂 。

(3) 组装引导轮总成前,表面必须清洁,且没有防护涂层。

(B) 安装长度 ... 785.0 ± 1.0 mm (30.91 ± 0.04 in)

Caterpillar Information System:

C9 Marine Generator Set Product Lifting
C32 Marine Engines System Configuration Parameters
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Flash Programming
C9 Engines for Caterpillar Built Machines Basic Engine
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Turbocharger - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Hydraulic Oil Cooler
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Return) - Case Drain Filter
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
345C Excavator Machine System Specifications Final Drive
345C Excavator Machine System Specifications Boom
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Disassemble
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Assemble
3508C, 3512C and 3516C Marine Engines Flywheel - Remove and Install
3126B Petroleum Engine Diagnostic Code Cross Reference
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Remove
3508B, 3512B and 3516B Generator Set Engines Flywheel Housing - Install
2004/12/01 Correct Wiring Diagrams Have Been Identified for 480 Volt Sensing VR3 to VR6 Regulator Conversion {4467}
2004/12/01 New Lockwasher Will Improve Varistor Reliability {4466}
C7.1 Industrial Engine Engine Stopping
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.