Seat - Install
Installation Procedure
Note: Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary. Lubricate the O-ring seals lightly with the lubricant that is being sealed.
- Fasten the seat belt on seat (9). Fasten a suitable lifting sling to the seat belt. Fasten the opposite end of the suitable lifting sling to a hoist. Position the seat for installation. The weight of the assembled seat is 80 kg (175 lb).
Show/hide table
Illustration 1 | g00591876 |
- Position seat (9) forward. Connect wiring harness (11) at the electrical connection.
Show/hide table
Illustration 2 | g00591882 |
- Install four bolts (10) and the washers.
Show/hide table
Illustration 3 | g00591879 |
- Connect wiring harness (7) and wiring harness (8) at the electrical connection.
Show/hide table
Illustration 4 | g00591872 |
- Connect the following items: hose assembly (3), hose assembly (4), hose assembly (5) and hose assembly (6) .
Show/hide table
Illustration 5 | g00591869 |
- Install the plate and baffle assembly (2). Install two bolts (1) and the washers.
Show/hide table
Illustration 6 | g00591864 |
End By:
- Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".
- Disconnect the frame lock link. Refer to Disassembly and Assembly, "Frame Lock Link - Separate and Connect".
Caterpillar Information System:
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0248 - FMI 09 Cat Data Link not communicating
613C Series II Wheel Tractor-Scraper Hydraulic System Elevator Frame
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Head - Install
994D Wheel Loader Machine System Seat - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
D9R Track-Type Tractor Coolant Sample (Level 1) - Obtain
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Cylinder Block
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0545 - FMI 06 Ether Start Relay short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt
3500B Engines Engine Oil Cooler - Disassemble
994D Wheel Loader Machine System Lubrication Pump (Automatic) - Remove and Install
994D Wheel Loader Machine System Oil Filter (Front Pump Drive Lubrication) - Remove and Install
D9R Track-Type Tractor Air Conditioner In-Line Dryer - Inspect
994D Wheel Loader Machine System VIDS/VIMS Interface Module - Remove and Install
D9R Track-Type Tractor Air Conditioner In-Line Dryer - Replace
994D Wheel Loader Machine System Temperature Sensor (Ambient Air) - Remove and Install
D9R Track-Type Tractor Cooling System Water Temperature Regulator - Replace
3500B Engines Engine Oil Cooler - Assemble
Repair of Cracks in Rear Track Roller Frame{4151} Repair of Cracks in Rear Track Roller Frame{4151}