Cylinder Block Cover Group
Show/hide table
| |
| Illustration 1 | g01449062 |
|
Left side view | |
Use the following procedure to tighten the bolts for the cylinder block cover group:
- Tighten the bolts in the numerical sequence that is shown.
- Again tighten the bolts in the numerical sequence that is shown.
(1) Torque for the bolt ...
Caterpillar Information System:
SR4 and SR4B Generators and Control Panels Maintenance Interval Schedule - Standby
SR4 and SR4B Generators and Control Panels Maintenance Interval Schedule - Standard
325D and 329D Excavators Engine Starting with Auxiliary Start Receptacle - If Equipped
C32 Marine and Marine Generator Set Engines Cooling System
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Refill Capacities and Recommendations
C32 Marine and Marine Generator Set Engines Air Inlet and Exhaust System
2004/11/01 New Software for Machine Information Display System (MIDS) {7620}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Software Installation
C7 Engines for Caterpillar Built Machines Flywheel Housing
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel Related Components in Cold Weather
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Model View Illustrations
3412E Petroleum Engine Battery - Test
2004/11/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
345C Excavator Hydraulic System Stick Drift Reduction Valve
C7 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
C7 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Fan Belts - Inspect/Adjust
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Fan Belts - Replace
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Crankcase Breather - Replace
C27 and C32 Engines Finding Top Center Position for No. 1 Piston
C9 Industrial Engines Cooling System
2004/12/01 Improved Alignment of a Coolant Tube {1380}
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Turbocharger - Inspect - If Equipped
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Water Pump - Inspect