Track - Disassemble
Disassembly Procedure
Show/hide table
Required Toolings     | A     | B     | C     | D     |
9U-6600 Hand Hydraulic Pump     | 1     |     |     | 1     |
5P-2380 Track Tool     | 1     |     |     | 1     |
8S-9978 Ram Adapter     | 1     |     |     |     |
5P-2188 Adapter     | 1     |     |     |     |
5F-9447 Pilot Pin     |     | 2     |     |     |
Felco Hydraulic Jack (20 ton)     |     |     | 1     |     |
8S-9975 Ram Adapter     |     |     |     | 1     |
7S-8469 Bushing Adapter     |     |     |     | 1     |
2S-8235 Bushing Pusher     |     |     |     | 1     |
Start By:
- Remove the track carrier roller. Refer to Disassembly and Assembly, "Track Carrier Roller - Remove" for the machine that is being serviced.
- Move the machine forward or backward. Position the track pins between the carrier roller and the front idler.
- Put blocks (1) into position under the front of the track.
Show/hide table
Illustration 1 | g00556996 |
- Put blocks (2) into position in order to support the track.
- Remove three track shoes (3) over the track pins.
Show/hide table
Illustration 2 | g00557079 |
- Fasten a hoist to Tooling (A). Put Tooling (A) into position against track pin (4) .
Show/hide table
Illustration 3 | g00557080 |
- Push track pin (4) out of the track with Tooling (A) and install one of Tooling (B) in order to hold the track together until the other track pin is removed.
- Put Tooling (A) into position against track pin (5). Push track pin (5) out of the track and install Tooling (B) .
- Remove Tooling (A) from the track.
- Put Tooling (C) into position in link assembly (7), as shown. Use Tooling (C) and spread the link assembly in order to disconnect link assembly (7) from link assembly (6) .
Show/hide table
Illustration 4 | g00557081 |
Show/hide table
NOTICE |
---|
Make sure that you do not damage the face of the seals when you force apart the links. |
- Remove Tooling (B). Move link assembly (6) away from link assembly (7) .
- Put Tooling (C) into position in link assembly (8), as shown.
Show/hide table
Illustration 5 | g00557082 |
- Use Tooling (C) and spread link assembly (8) in order to remove link assembly (7). Remove Tooling (B) and link assembly (7) .
- Remove seals (9) and rings (10) from link assembly (7) .
Show/hide table
Illustration 6 | g00557083 |
- Put the link assembly into position in Tooling (D), as shown.
Show/hide table
Illustration 7 | g00557084 |
- Remove link (11) from bushing (12) with Tooling (D) .
- Use Tooling (D) in order to remove link (13) from bushing (12) .
Show/hide table
Illustration 8 | g00677491 |
- Remove the plugs and the stoppers from the track pins.
Caterpillar Information System:
D5M Track-Type TractorPower Train Track - Connect
D5M Track-Type TractorPower Train Track - Assemble
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Remove
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Install
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Disassemble
D5M Track-Type TractorPower Train Torque Converter Outlet Relief Valve - Assemble
D5M Track-Type TractorPower Train Torque Converter - Remove
D5M Track-Type TractorPower Train Torque Converter - Install
515 Wheel Skidder and 525 Wheel Skidder Drive Shaft Spline (Front) - Lubricate
D5M Track-Type TractorPower Train Torque Converter - Disassemble
3306C Engines for Caterpillar Built Machines Governor
D7R Track-Type TractorPower Train Equalizer Bar
D5M Track-Type TractorPower Train Track - Separate
D5M Track-Type TractorPower Train Track Adjuster - Remove and Install
D5M Track-Type TractorPower Train Track Carrier Roller - Assemble
D5M Track-Type TractorPower Train Track Carrier Roller - Disassemble
D5M Track-Type TractorPower Train Track Carrier Roller - Install
D5M Track-Type TractorPower Train Track Carrier Roller - Remove
D5M Track-Type TractorPower Train Track Roller - Assemble
D5M Track-Type TractorPower Train Track Roller - Disassemble
D5M Track-Type TractorPower Train Track Roller - Install
D5M Track-Type TractorPower Train Track Roller - Remove
D5M Track-Type TractorPower Train Track Roller Frame - Install
D5M Track-Type TractorPower Train Track Roller Frame - Remove