Flywheel Housing
Show/hide table
| 图 1 | g01099632 |
(1) 飞轮壳
(2) 将螺栓拧紧至以下扭矩。 ... 125 ± 20 N·m (92 ± 15 lb ft)
将 1U-8846 密封垫密封胶 涂抹到飞轮壳体的密封垫表面。 将飞轮壳体组装到缸体上，然后在涂抹密封胶 10 分钟内拧紧。
Caterpillar Information System:
C7 Marine Engines Water Temperature Regulator - Remove and Install - Heat Exchanger System
C13 and C15 Engines for Combat and Tactical Vehicles Intake Valve Actuation System Oil Pressure Circuit - Test
C-10 Petroleum Engine Water Temperature Regulator
Cat Commercial Diesel Engine Fluids Recommendations S·O·S Services Coolant Analysis
C15 On-highway Engines Injector Solenoid Circuit - Test
G3306 Engine Refill Capacities and Recommendations
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
2004/09/01 New Software is Used {7620}
C15 On-Highway Engine Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C15 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines Muffler
C13 and C15 Engines for Combat and Tactical Vehicles Intake Valve Actuator Circuit - Test
C9 On-highway Engine Electric Starting Motor
3406E and C15 Marine Engines Electric Starting Motor
120M, 12M, 140M and 160M Motor Graders Power Train Temperature Sensor (Transmission Oil)
Installation of Inverted Duo-Cone Seals{7561} Installation of Inverted Duo-Cone Seals{7561}
Torque Procedure for the OR-8839 Oil Cooler Core As {1378} Torque Procedure for the OR-8839 Oil Cooler Core As {1378}
C15 On-highway Engines Retarder (Compression Brake) Solenoid Circuit - Test
3408C and 3412C Marine Engines Auxiliary Water Pump
C15 and C18 Industrial Engines Electronic Control Module - Remove and Install
Marine Multi-Station Control System Operator Controls
G3304 and G3306 Engines Electric Starting Motor
Marine Multi-Station Control System Switch Inputs Not Working