Bumper - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Description     | Qty     |
A     | 138-7574     | Link Bracket     | 1     |
- Attach Tooling (A) and a suitable lifting device to the bumper.
Show/hide table
Illustration 1 | g00470308 |
- Remove bolts (1) and the washers from both sides of the bumper. Remove the bumper. The weight of the bumper is approximately 544 kg (1200 lb).
Show/hide table
Illustration 2 | g00470310 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Description     | Qty     |
A     | 138-7574     | Link Bracket     | 1     |
- Attach Tooling (A) and a suitable lifting device to the bumper, as shown.
Show/hide table
Illustration 3 | g00470308 |
- Position the bumper. The weight of the bumper is approximately 544 kg (1200 lb). Install bolts (1) and the two washers in both sides of the bumper.
Show/hide table
Illustration 4 | g00470310 |
Caterpillar Information System:
966F Series II Wheel Loader Power Train Limited Slip Differential - Assemble
980G Wheel Loader Braking System Gear Pump (Pilot and Braking)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
D9R Track-Type Tractor Hydraulic System Oil Level - Check
D11R Track-Type Tractor Electro/Hydraulic Oil Filter - Change
980G Wheel Loader Braking System Liquid Level Switch (Hydraulic Tank)
D8R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
902 and 906 Compact Wheel Loaders Power Train System Hydrostatic System - Test and Adjust
980G Wheel Loader Steering System Breaker Relief Valve
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Leading Arm Bearings - Remove and Install
Weld Repair Instructions for the Cab{7301} Weld Repair Instructions for the Cab{7301}
963C Track-Type Loader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove
902 and 906 Compact Wheel Loaders Steering System Hydraulic Oil Contamination - Test
Critical Dimensions for Bucket Control Linkage {6107} Critical Dimensions for Bucket Control Linkage {6107}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Visual Inspection
980G Wheel Loader Hydraulic System Vane Pump (Implement and Hydraulic Fan)