Gear Pump (Pilot and Braking)
Show/hide table
Illustration 1 | g00466167 |
(1) Torque for the four bolts ... 72 ± 3 N·m (53 ± 2 lb ft)
The rotation of the shaft is clockwise when the pump is viewed from the drive end.
For testing purposes, use SAE 10W oil at 66°C (150°F).
Test at Full Speed:
- Output ... 39.5 L/min (10.27 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 2100 rpm
- Engine speed ... 2100 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 39.1 L/min (10.17 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 2100 rpm
- Engine speed ... 2100 rpm
- Pressure ... 6900 kPa (1000 psi)
Test at Half Speed:
- Output ... 19.8 L/min (5.14 US gpm)
- Pressure ... 690 kPa (100 psi)
- Pump speed ... 1050 rpm
- Engine speed ... 1050 rpm
- Pressure ... 690 kPa (100 psi)
- Output ... 19.6 L/min (5.08 US gpm)
- Pressure ... 6900 kPa (1000 psi)
- Pump speed ... 1050 rpm
- Engine speed ... 1050 rpm
- Pressure ... 6900 kPa (1000 psi)
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
D9R Track-Type Tractor Hydraulic System Oil Level - Check
D11R Track-Type Tractor Electro/Hydraulic Oil Filter - Change
980G Wheel Loader Braking System Liquid Level Switch (Hydraulic Tank)
D8R Track-Type Tractor Engine Air Filter Secondary Element - Replace
D7R Track-Type Tractor Hydraulic System Bulldozer Tilt Cylinder
902 and 906 Compact Wheel Loaders Power Train System Hydrostatic System - Test and Adjust
980G Wheel Loader Steering System Breaker Relief Valve
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Leading Arm Bearings - Remove and Install
953C Track-Type Loader Machine Systems Cab - Install
D11R Track-Type Tractor Fan Return Oil Filter - Change
966F Series II Wheel Loader Power Train Limited Slip Differential - Assemble
953C Track-Type Loader Machine Systems Bumper - Remove and Install
Weld Repair Instructions for the Cab{7301} Weld Repair Instructions for the Cab{7301}
963C Track-Type Loader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove
902 and 906 Compact Wheel Loaders Steering System Hydraulic Oil Contamination - Test
Critical Dimensions for Bucket Control Linkage {6107} Critical Dimensions for Bucket Control Linkage {6107}
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting