Bulldozer Tilt Cylinder
Show/hide table
Illustration 1 | g00733374 |
(1) Torque for nut with lubricant on the threads (critical characteristic) ... 3400 ± 340 N·m (2500 ± 250 lb ft)
(2) Bore of cylinder ... 165.15 ± 0.10 mm (6.5 ± 0.0039 inch)
(3) Diameter of rod ... 76.150 ± 0.038 mm (3.0 ± 0.0015 inch)
(4) Bore of head ... 76.48 ± 0.03 mm (3.01 ± 0.0012 inch)
(5) Torque for four bolts ... 1050 ± 150 N·m (780 ± 120 lb ft)
(6) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove prior to assembly.
(7) Lubricate the lips of the seals lightly with the lubricant that is being sealed.
(8) Critical dimensions
- Stroke ... 162 mm (6.38 inch)
- Distance from pin to pin on fully retracted 3G-4533 Tilt Cylinder ... 1260 mm (49.61 inch)
Caterpillar Information System:
902 and 906 Compact Wheel Loaders Power Train System Hydrostatic System - Test and Adjust
980G Wheel Loader Steering System Breaker Relief Valve
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Leading Arm Bearings - Remove and Install
953C Track-Type Loader Machine Systems Cab - Install
D11R Track-Type Tractor Fan Return Oil Filter - Change
980G Wheel Loader Steering System Hydraulic Tank and Filter
G3B, K3A and L3A Denso Alternators General Information
D9R Track-Type Tractor Engine Oil Level - Check
637E Series II Wheel Tractor-Scrapers Transmission Oil Filter and Magnetic Screen - Replace/Clean
D7R Track-Type Tractor Hydraulic System Ripper Control Valve
953C Track-Type Loader Machine Systems Cab - Remove
953C Track-Type Loader Machine Systems Cab Air Filter (Exterior) - Remove and Install
D8R Track-Type Tractor Engine Air Filter Secondary Element - Replace
980G Wheel Loader Braking System Liquid Level Switch (Hydraulic Tank)
D11R Track-Type Tractor Electro/Hydraulic Oil Filter - Change
D9R Track-Type Tractor Hydraulic System Oil Level - Check
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
980G Wheel Loader Braking System Gear Pump (Pilot and Braking)
966F Series II Wheel Loader Power Train Limited Slip Differential - Assemble
953C Track-Type Loader Machine Systems Bumper - Remove and Install
Weld Repair Instructions for the Cab{7301} Weld Repair Instructions for the Cab{7301}
963C Track-Type Loader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove