Engine Air Precleaner - Clean
Show/hide table
NOTICE |
---|
Service the air cleaner only with the engine stopped. Engine damage could result. |
Show/hide table
Illustration 1 | g00402547 |
The engine air precleaner is on the right front side of the tractor.
Under most conditions, cleaning the screen (1) with a brush or cleaning with a towel will be sufficient.
Under extreme conditions, the precleaner should be removed.
- Loosen the clamp (2) at the bottom of the precleaner.
- Remove the precleaner. Inspect the opening in the tube for dirt. Clean the tube if the tube is dirty.
- Clean the precleaner screen.
- Install the precleaner and tighten the clamp.
Caterpillar Information System:
637E Series II Wheel Tractor-Scrapers Cooling System Coolant (DEAC) - Change
902 and 906 Compact Wheel Loaders Braking System Master Cylinder
994D Wheel Loader Power Train Transmission Planetary
613C Series II Wheel Tractor-Scraper Machine Systems Air/Hydraulic Cylinder (Brake) - Assemble
631E Series II Wheel Tractor-Scrapers Cooling System Coolant (DEAC) - Change
Field Installation of the Hystat Joystick Effort and Modulation Springs{5059} Field Installation of the Hystat Joystick Effort and Modulation Springs{5059}
992G Wheel Loader and 854G Wheel Dozer Power Train Wheel Bearings - Adjust
966G Wheel Loader and 972G Wheel Loader Machine Systems Diverter Valve (Ride Control) - Remove
994D Wheel Loader Power Train Pressure Sensor (Impeller Clutch Oil)
990 Wheel Loader, 990 Series II Wheel Loader and 844 Wheel Dozer Power Train Wheel Bearings - Adjust
992G Wheel Loader and 854G Wheel Dozer Steering System Limit Switch (STIC Lockout Control) - Adjust
854G Wheel Dozer Machine Systems Lift Cylinder Mounting - Remove and Install
854G Wheel Dozer Machine Systems Main Control Valve - Disassemble
854G Wheel Dozer Machine Systems Main Control Valve - Assemble
D6R Track-Type Tractor Power Train Drive Shaft
992G Wheel Loader and 854G Wheel Dozer Power Train Input Transfer Gears - Adjust
992G Wheel Loader and 854G Wheel Dozer Power Train Output Transfer Gears - Adjust
992G Wheel Loader and 854G Wheel Dozer Power Train Differential Pinion Preload - Adjust
992G Wheel Loader and 854G Wheel Dozer Power Train Differential Backlash and Bearings - Adjust
D6R Series II Track-Type Tractor Power Train Pivot Shaft
854G Wheel Dozer Machine Systems Lift Cylinder - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Diverter Valve (Ride Control) - Install
613C Series II Wheel Tractor-Scraper Machine Systems Brake Control Valve (Service) - Remove and Install
637E Series II Wheel Tractor-Scrapers Engine Air Precleaner - Clean