G3500 Engines Caterpillar


Product Storage

Usage:

G3508 2JF

发动机存放

如果发动机几周不起动,润滑油将从缸壁和活塞环中流出。 在缸套表面可能形成锈斑,这将增加发动机的磨损,降低发动机使用寿命。

为防止发动机过度磨损,遵守下列准则:

  • 完成在本操作和保养手册, "保养周期表"(保养部分)中列出的全部润滑建议。

  • 如果预计发动机会在冰冻温度下运转,检查冷却系统是否有足够的防冻保护。 请参阅本操作和维护手册, "加注容量和建议"(保养部分)。

如果发动机不运转,或者没有计划使用发动机,应采取特殊的预防措施。 如果发动机将存放一个月以上,建议制订一个完整的防护步骤。

如果电源模块存储超过六个月,也必须净化燃料系统:

  1. 拆下至电源模块的燃料进口法兰。

  2. 拆下燃料滤清器塞 "A"。

  3. 使用干燥空气源(最大 10 psi)净化燃料管路。

您的 Caterpillar 代理商处将会有关于如何准备发动机以备长期存放的说明。

更多有关发动机存放的详细信息资料,请参阅专门说明书, SEHS9031, "Caterpillar 产品的存放步骤"。

Caterpillar Information System:

C11 and C13 Petroleum Engines Coolant Conditioner Base
C9 Marine Generator Set Engines Cooling System - Test
C32 Marine Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C32 Marine Engines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines CID 0174 FMI 04 Fuel Temperature short to ground
C27 and C32 Generator Set Engines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 04 Engine Oil Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0094 FMI 04 Fuel Pressure short to ground
C7 Urban Transit Bus Engines Cooling System Coolant Extender (ELC) - Add
C7 Marine Engines Heat Exchanger - Remove
325D and 329D Excavators Fuel Tank Shutoff and Drain Control
320D Excavator Fuel Tank Water and Sediment - Drain
G3520B Industrial Engine System Overview
2004/07/05 249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
G3520B Industrial Engine Location of Components
C7 Marine Engines Heat Exchanger - Install
345C MHPU Mobile Hydraulic Power Unit Engine Starting
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
2004/07/01 New Cylinder Head Group {1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.