Heat Exchanger - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) and a suitable lifting device in order to position heat exchanger (8) on the side of the engine. The weight of heat exchanger (8) is approximately 51 kg (112 lb). Install bolts (10) .
Show/hide table
Illustration 1 | g01237253 |
Show/hide table
Illustration 2 | g01237256 |
- Install bolts (9) .
Show/hide table
Illustration 3 | g01237255 |
- Connect hoses (5) , (6) , and (7) .
Show/hide table
Illustration 4 | g01237252 |
- Connect tube assemblies (3) and (4) .
Show/hide table
Illustration 5 | g01237251 |
- Connect tube assemblies (1) and (2) .
Show/hide table
Illustration 6 | g01237249 |
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
End By: Install the transmission oil cooler and the auxiliary oil cooler. Refer to Disassembly and Assembly, "Oil Cooler (Transmission, Auxiliary) - Remove and Install".
Caterpillar Information System:
G3520B Industrial Engine Location of Components
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
2004/07/05 249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
G3520B Industrial Engine System Overview
320D Excavator Fuel Tank Water and Sediment - Drain
325D and 329D Excavators Fuel Tank Shutoff and Drain Control
C7 Marine Engines Heat Exchanger - Remove
C7 Urban Transit Bus Engines Cooling System Coolant Extender (ELC) - Add
G3500 Engines Product Storage
C11 and C13 Petroleum Engines Coolant Conditioner Base
C9 Marine Generator Set Engines Cooling System - Test
C32 Marine Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
345C MHPU Mobile Hydraulic Power Unit Engine Starting
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
2004/07/01 New Cylinder Head Group {1100}
C15 On-Highway Engine Engine Oil Pump - Remove
C15 On-Highway Engine Engine Oil Pump - Install
C15 On-Highway Engine Flywheel - Remove
C15 On-Highway Engine Flywheel - Install
C7 Marine Engines Heat Exchanger - Disassemble
G3500 Engines Safety Messages
C7 Marine Engines Heat Exchanger - Assemble
325D and 329D Excavators Engine and Machine Warm-Up
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}