Brake Disc Initial Measurements Caterpillar


Brake Disc Initial Measurements

Usage:

WHEEL LOADERS950G (5FW1-UP, 2JS1-UP),
962G (7BW1-UP, 3BS1-UP) WHEEL LOADERS

Problem:

Initial measurements for brake disc wear have not been loaded into the transmission ECM (Electronic Control Module) for the first built 950G and 962G Wheel Loaders.

Solution:

The following pages give the brake disc initial measurements taken and recorded in the factory for all units shipped with missing information in the transmission ECM. Some dimensions are missing, and we apologize for that.

Those values can be loaded into the transmission ECM, using ET. Or be reported into the machine history file at the dealership for further use.

CATERPILLAR BELGIUM WHEEL LOADER TEAM COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Fuel Line Breakage Fuel Line Breakage
Check Valve Failure In Priority Valve Check Valve Failure In Priority Valve
Procedure To Prevent Rocks Throwing The Fan Belt Procedure To Prevent Rocks Throwing The Fan Belt
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
Burnt Smell And Black Coolant From 3406 Engines In These Wheel-Tractor Scrapers Burnt Smell And Black Coolant From 3406 Engines In These Wheel-Tractor Scrapers
New Part Number For Engine Shutdown Solenoid New Part Number For Engine Shutdown Solenoid
113-1721 Tube Assembly Failure 113-1721 Tube Assembly Failure
Correction To Service Letter, PI3192, "The Software Needs To Be Updated On Certain 992G Wheel Loaders" Correction To Service Letter, PI3192, "The Software Needs To Be Updated On Certain 992G Wheel Loaders"
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC) Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Pre-Lube Switch Contacts Stick Pre-Lube Switch Contacts Stick
The 142-2882 Flow Control Valves May Cause Vibration And Noise In Transmission Hoses The 142-2882 Flow Control Valves May Cause Vibration And Noise In Transmission Hoses
D11 Track-Type Tractor CrN Track Bushing Available For Parts Service D11 Track-Type Tractor CrN Track Bushing Available For Parts Service
Gas Leak At Ride Control Accumulator Gas Leak At Ride Control Accumulator
Incorrect Torque Specification For Cab Mount Bolts Incorrect Torque Specification For Cab Mount Bolts
Gear Installation Of Hystat Drive Motors Gear Installation Of Hystat Drive Motors
3306 Engine Oil Pan Plate Leaks 3306 Engine Oil Pan Plate Leaks
Brake Pump Pressure Brake Pump Pressure
Clamping Problems For Torque Converter Output Yoke Clamping Problems For Torque Converter Output Yoke
Blade Guard May Interfere With Upper Radiator Guard Hinge Blade Guard May Interfere With Upper Radiator Guard Hinge
Cracking Of Non-Metallic Roof Cracking Of Non-Metallic Roof
Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System
3300 Engine Oil Level Maintenance And High Oil Consumption 3300 Engine Oil Level Maintenance And High Oil Consumption
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
Correct Packaging Of Transmission Rotating Seals Correct Packaging Of Transmission Rotating Seals
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.