C-10 Petroleum Engine Caterpillar


Engine Oil Level - Check

Usage:

C-10 Z2B

------ WARNING! ------

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.




Illustration 1g01062632
(1) Oil filler cap
(2) Engine oil level gauge


Illustration 2g00110310
(Y) "ADD" mark. (X) "FULL" mark.


NOTICE

Perform this maintenance with the engine stopped.


    Note: Before you perform this maintenance, do not operate the engine for at least 10 minutes in order to allow the engine oil to return to the oil pan.

  1. Maintain the oil level between "ADD" mark (Y) and "FULL" mark (X) on the engine oil level gauge (2). Do not fill the crankcase above "FULL" mark (X).


    NOTICE

    Operating your engine when the oil level is above the "FULL" mark could cause your crankshaft to dip into the oil. The air bubbles created from the crankshaft dipping into the oil reduces the oil's lubricating characteristics and could result in the loss of power.


  2. Remove oil filler cap (1) and add oil, if necessary. Clean the oil filler cap. Reinstall the oil filler cap.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.