Usage:
613C-II (8LJ),
615C-II (9XG),
611 (6SZ) Wheel Tractors
Description of Change: The flasher control has been relocated and mounted on a new bracket to protect it from accidental foot contact.
Adaptable To: The change to the 2T-3374 Signal Lighting Group adds a new 8I-2083 Bracket and two 9S-2437 Screws and is effective with 613C-II (8LJ1972) and 615C-II (9XG1266) Wheel Tractors. The change to the 8I-2074 Signal Lighting Group adds a new 8I-2083 Bracket and two 9S-2437 Screws and is effective with 611 (6SZ191) Wheel Tractors. The changes are adaptable to earlier machines by the following procedure.
Illustration 1.
Typical Signal Lighting Group.
Illustration 2.
View D-D from Illustration 1.
Procedure To Adapt Earlier Machines
1. Remove flasher control from the underside of the dash.
2. Mount flasher control to the new 8I-2083 Bracket (item 1) using two 9S-2437 Self-Tapping Screws (item 2).
3. Mount the new 8I-2083 Bracket (item 1) to the two existing bosses located on the back side of the steering column using the two existing 8T-9371 Bolts (item 3) and the two existing 8T-4896 Washers (item 4).