Track Carrier Rollers
Usage:
(1) Assemble shaft even with the back of the bracket. Make an adjustment if necessary for track alignment.
(2) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Put lubricant on all other seals at assembly.
(3) Assemble the ground face of the plate to the end of shaft and bearing.
(4) Torque for bolts (two) ... 32 ± 5 lb. ft.(45 ± 7 N·m)
(5) Put lubricant on the inside of collar assembly before installation.
(6) Torque for plug ... 125 ± 15 lb. ft.(170 ± 20 N·m)
Caterpillar Information System:
D4E TRACTOR POWER TRAIN Track Rollers (Single and Double Flange)
D4E TRACTOR POWER TRAIN Alignment Of Track Roller Frame
D4E TRACTOR POWER TRAIN Drawbar Group (9K8513)
D4E TRACTOR POWER TRAIN Drawbar Group (9H5806)
D4E TRACTOR POWER TRAIN Main Frame
D4E TRACTOR POWER TRAIN Case And Cover For The Steering Clutch
D4E TRACTOR POWER TRAIN Equalizer Spring (4K5207)
D4E TRACTOR POWER TRAIN Adjustment Of Final Drive Bearings
D4E TRACTOR POWER TRAIN Final Drive
D4E TRACTOR POWER TRAIN Adjustment Procedures For The Brakes
D4E TRACTOR POWER TRAIN Adjustment Of Yoke Assemblies
D4E TRACTOR POWER TRAIN Adjustment Of Linkage Stop
D4E TRACTOR POWER TRAIN Front Idlers And Recoil Springs
D4E TRACTOR POWER TRAIN Track Roller Frame
D4E TRACTOR POWER TRAIN Track
D4E TRACTOR POWER TRAIN Track Adjustment
D4E TRACTOR POWER TRAIN Mounting Group (Rops)
D4E TRACTOR POWER TRAIN Systems Operation
D4E TRACTOR POWER TRAIN Testing And Adjusting
D4E POWER SHIFT TRANSMISSION Power Shift Transmission Testing And Adjusting
D4E TRACTOR POWER TRAIN Track Carrier Roller
D4E TRACTOR POWER TRAIN Track Rollers
D4E TRACTOR POWER TRAIN Tracks
D4E TRACTOR POWER TRAIN Front Idlers