Front Cover - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 194-3536     | Socket Assembly     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove button head screws (1) .
Show/hide table
Illustration 1 | g01007036 |
- Remove nuts (5) and spacers (4) from studs (3) .
- Remove front cover (2) from the front housing.
- Remove seal (6) from front cover (2) .
Show/hide table
Illustration 2 | g01007039 |
Caterpillar Information System:
G3500 Generator Sets Cold Weather Starting
C15 On-highway Engine Crankshaft Front Seal - Install
G3500 Generator Sets Reference Information
G3300 Engines Cooling System Coolant Analysis (Level II) - Obtain
C15 and C18 Generator Set Engines Crankshaft Front Seal - Remove
G3300 Engines Cooling System Coolant Analysis (Level I) - Obtain
2003/06/01 Improved Rectifiers Increases Service Life {4473}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Instrument Panel
2003/08/11 New Recommended Maintenance Intervals for Coolant and Temperature Regulators {1350, 1355, 1395}
Cat® Digital Voltage Regulator Power Factor Regulation
C7 Engines for Combat and Tactical Vehicles Warning Lamp Circuit - Test
Cat® Digital Voltage Regulator KVAR Regulation
C15 On-Highway Engine Front Cover - Install
C15 On-highway Engine Housing (Front) - Remove
C15 On-highway Engine Housing (Front) - Install
C7 Urban Transit Bus Engines Information Plate
G3500 Generator Sets Single Unit Operation
C4.4 Industrial Engine Stopping the Engine
C1.5 and C2.2 Industrial Engines After Stopping Engine
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Model View Illustrations
C7 Engines for Combat and Tactical Vehicles Reference Material
G3500 Generator Sets Throttle Control Valve - Check
2003/07/01 A Revised Mounting Procedure for the Sending Unit for the Oil Is Available {3080, 3300}
Cat® Digital Voltage Regulator Parameters