C15 and C18 Generator Set Engines Caterpillar


Crankshaft Front Seal - Remove

Usage:

C15 115

拆卸步骤

表 1
所需工具 
工具  零件号  零件说明  数量 
1U-7600  滑锤拉拔器 
撬杆 
5P-7318  承磨衬套破坏工具总成 

开始:

  1. 拆下减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


注: 必须同时更换曲轴前密封和承磨衬套。 一旦曲轴前密封与承磨衬套分开,就不得再次使用这些部件。



    图 1g01044861

    注: 请您确保使用工具 (B) 时不要损坏前壳体。

    注: 如果承磨衬套开始从曲轴上滑脱,请转至步骤 2。

  1. 使用工具 (B) 撬动承磨衬套 (2) 的密封唇周围。

  2. 使用小型钻孔机在曲轴前密封 (1) 中钻出不少于三个的孔。

  3. 使用工具 (A) 拆下曲轴前密封 (1)。

  4. 如有必要,使用工具 (C) 拆下承磨衬套 (2) 。

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.