Junction Box
Show/hide table
| |
| Illustration 1 | g00995271 |
(1) Nut
- Torque ...
3.6 ± 0.4 N·m (32.00 ± 3.50 lb in)
(2) Nut
- Torque ...
1.70 ± 0.25 N·m (15.000 ± 2.000 lb in)
(3) Solenoid
- Resistance at
25 °C (77 °F) ... 17.7 ± 0.4 Ohms
Caterpillar Information System:
3456 Generator Sets Voltage Regulators
TK711, TK721, TK722 and TK732 Track Feller Bunchers Oil Filter - Inspect
C15 and C18 Petroleum Generator Sets Mounting and Dismounting
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Install
C1.5 and C2.2 Generator Generator - Remove
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Disassemble
G3520B Industrial Engine Ignition Transformers Secondary Circuit and Spark Plugs
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Remove
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Assemble
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Install
3500B and 3500C Marine Propulsion Engines E279 High Aftercooler Temperature Warning
3406E and 3456 Generator Set Engines E173 High Exhaust Temperature Warning
3054E Industrial Engine Fuel Injection Pump - Install
G3304 and G3306 Engines Auxiliary Water Pump - Assemble
3116 and 3126 Truck Engines Rocker Shaft and Pushrod - Remove
2003/05/01 New Cylinder Liner {1216}
2003/08/01 A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
3500B and 3500C Marine Propulsion Engines Electronic Display Module
3500 Marine Engines Accumulator Pressure - Test
3116 and 3126 Truck Engines Rocker Shaft - Disassemble
G3520B Industrial Engine PWM Sensor
2003/05/12 New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
3116 and 3126 Truck Engines Rocker Shaft - Assemble
3116 and 3126 Truck Engines Rocker Shaft and Pushrod - Install