Data Link Parameters
"Powertrain Data Link"
This parameter must be programmed to "J1939" in order to receive any switch inputs from the "J1939" data link. This parameter determines if the Engine Control Module (ECM) will communicate to a power train component through the J1939 data link. If the vehicle is not using the data link for communication to the power train systems, program this parameter to "None". The following systems are examples of power train systems:
- Traction control systems
- Anti-lock brake systems
- Electronically controlled transmissions
Note: A 231-11 J1939 Data Link Fault will occur if the parameter for the power train data link is set to J1939 without a J1939 power train ECM on the vehicle. The J1939 power train ECM is used to communicate with the engine ECM.
Show/hide table
Alternative     | Default     |
"J1939"     | "None"     |
Caterpillar Information System:
G3304 and G3306 Engines Engine Oil Pump - Install
3516B HD Generator Set Engine Mounts - Check
3126E and 3126B Commercial and Truck Engines Federal Emission Control Warranty
C7 Engines for Caterpillar Built Machines Camshaft Idler Gear - Remove and Install
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Install
C15 On-highway Engine Pistons and Connecting Rods - Remove
C15 and C18 Generator Set Engines Connecting Rod Bearings - Remove
C15 On-Highway Engine Crankshaft - Install
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Disassemble
C15 On-Highway Engine Pistons and Connecting Rods - Assemble
C15 On-Highway Engine Camshaft - Remove
C15 On-Highway Engine Camshaft - Install
G3304 and G3306 Engines Engine Oil Pump - Disassemble
C7 Engines for Combat and Tactical Vehicles Dedicated PTO Parameters
C7 Engines for Combat and Tactical Vehicles Engine/Gear Parameters
3126E and 3126B Commercial and Truck Engines California Emission Control Warranty Statement
C7 Engines for Combat and Tactical Vehicles Engine Monitoring Parameters
C15 On-highway Engine Engine Oil Cooler - Remove
3500B Series II Marine Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B Series II Marine Engines MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
3516B HD Generator Set Generator Oil Level - Check
3500B Generator Sets Safety Messages
C15 On-highway Engine Engine Oil Cooler - Install
C7 and C9 On-Highway Engines Diagnostic Codes