G3304 and G3306 Engines Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g00989729

1. Place oil pump (1) in position on the cylinder block and install the four locks and four bolts that hold oil pump (1).
   Show/hide table

   Illustration 2	g00989731

2. Install a new gasket.

3. Connect tube assembly (2) to oil pump (1). Install two bolts (3).

4. Install the locking tab and bolt (4).

End By:

1. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install" for the engine that is being serviced.