Rocker Arm and Shaft - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 124-2946 | Lifting Bracket | 1 |
Start By:
- Remove the valve actuator. Refer to Disassembly and Assembly, "Valve Actuator (Variable) - Remove".
- Remove the compression brake. Refer to Disassembly and Assembly, "Compression Brake - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove shaft (3), valve rocker arms (1), and unit injector rocker arms (2) as a unit with Tooling (A).
- Repeat Step 1 for the remainder of the rocker arm assemblies.
Show/hide table
Illustration 1 | g00996515 |
Show/hide table
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head. |
Caterpillar Information System:
3516B HD Generator Set Generator Oil - Change
G3304 and G3306 Engines Engine Oil Pump - Remove
C15 On-highway Engine Valve Mechanism Cover Base - Remove and Install
C15 On-highway Engine Electronic Unit Injector - Remove
C15 On-highway Engine Electronic Unit Injector - Install
G3500B Engines Engine Sensors
3516B HD Generator Set Generator Set Description
C7 On-highway Engine Belt Tensioner - Remove and Install
C11, C13 and C15 On-highway Engines Trip Parameters
C1.5 and C2.2 Generator Bearing - Remove and Install
G3304 and G3306 Engines Engine Oil Pan - Install
3054E Industrial Engine Air Compressor - Remove and Install
C15 On-highway Engine Rocker Arm and Shaft - Install
Cold Weather Recommendations for On-Highway Diesel Truck Engines Engine Coolant Considerations
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Install
C15 On-Highway Engine Crankshaft - Remove
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Remove
C15 and C18 Generator Set Engines Connecting Rod Bearings - Install
C15 On-Highway Engine Camshaft - Install
C15 On-Highway Engine Camshaft - Remove
C15 On-Highway Engine Pistons and Connecting Rods - Assemble
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Disassemble
C15 On-Highway Engine Crankshaft - Install
C15 and C18 Generator Set Engines Connecting Rod Bearings - Remove