Engine Oil Pump - Remove
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove" for the engine that is being serviced.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Bend the tab on lock (1) away from bolt (2). Remove bolt (2).
Show/hide table
Illustration 2 g00989661 - Remove bolts (4) and disconnect tube assembly (3).
- Bend the tabs on the locks away from the bolts and remove the four bolts (5) that hold oil pump (6) to the cylinder block.
- Remove oil pump (6).
Show/hide table
| |
| Illustration 1 | g00989659 |
Caterpillar Information System:
C15 On-highway Engine Valve Mechanism Cover Base - Remove and Install
C15 On-highway Engine Electronic Unit Injector - Remove
C15 On-highway Engine Electronic Unit Injector - Install
G3500B Engines Engine Sensors
3516B HD Generator Set Generator Set Description
C7 On-highway Engine Belt Tensioner - Remove and Install
C11, C13 and C15 On-highway Engines Trip Parameters
C1.5 and C2.2 Generator Bearing - Remove and Install
G3304 and G3306 Engines Engine Oil Pan - Install
3054E Industrial Engine Air Compressor - Remove and Install
C7 On-Highway Engine Front Cover - Install
G3500B Engines Integrated Temperature Sensing Module
3516B HD Generator Set Generator Oil - Change
C15 On-highway Engine Rocker Arm and Shaft - Remove
C15 On-highway Engine Rocker Arm and Shaft - Install
Cold Weather Recommendations for On-Highway Diesel Truck Engines Engine Coolant Considerations
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Install
C15 On-Highway Engine Crankshaft - Remove
C15 and C18 Generator Set Engines Crankshaft Main Bearings - Remove
C15 and C18 Generator Set Engines Connecting Rod Bearings - Install
C15 On-Highway Engine Camshaft - Install
C15 On-Highway Engine Camshaft - Remove
C15 On-Highway Engine Pistons and Connecting Rods - Assemble
C15 and C18 Generator Set Engines Pistons and Connecting Rods - Disassemble