Engine Oil Level - Check
Show/hide table
 |
热油和热的部件可能会导致人员受伤。 不要让热的油和部件接触皮肤。 |
Show/hide table
 | |
| 图 1 | g00986928 |
(Y) 最低 "MIN" 标记。 (X) 最高 "MAX" 标记。 | |
Show/hide table
| 注意 |
|---|
在发动机停机时进行该保养。 |
- 将油位保持在油尺 (1) 上的最低"MIN" 标记 (Y) 和最高"MAX" 标记 (X) 之间 。 向曲轴箱加注油时，不要超过"最高（MAX）"标记 (X) 。
- 如有必要，取下加注口盖，添加机油。 清洁发动机机油加注口盖。 安装机油加注口盖。
Show/hide table
| 注意 |
|---|
当机油油位高于"满（FULL）"标记时，操作发动机会使曲轴浸入机油中。 曲轴浸入机油所产生的空气泡，会削弱机油的润滑能力并导致功率损失。 |
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C4.4 (Mech) Industrial Engine Valve Guide - Inspect
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft Pulley
3044C Industrial Engine and Engines for Caterpillar Built Machines Flywheel
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Input/Output Daughter Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Zig Zag Controller Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Parallel Cabinet Controller Board - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Gear Group (Front)
3044C Industrial Engine and Engines for Caterpillar Built Machines Front Housing and Covers
2003/04/01 The Procedure for Shipping Service Manuals has Changed {0374}
3044C Industrial Engine and Engines for Caterpillar Built Machines Piston and Rings
3044C Industrial Engine Cooling System Coolant Level - Check
G3500B Engines Ignition System - 20 Cylinders
3044C Industrial Engine Reference Material
3618 Engine Reference Information
3046 Engine for Caterpillar Built Machines Engine Oil Pressure - Test
3046 Engine for Caterpillar Built Machines Engine Oil Pump - Inspect
C7 On-Highway Engine Fuel Priming Pump - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Inspect
C7 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C18 Generator set and C18 Marine Engines Heat Exchanger - Disassemble - Without Fuel Cooler
C7 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3304 and G3306 Engines Engine Oil Cooler - Remove