3618 Engine Caterpillar


Reference Information

Usage:

3618 2MW
Identification of the items in Table 1 may be needed in order to obtain parts and service. Some of the numbers are on the engine Serial Number Plate and/or Information Plate. Locate the information for your engine. Record the information on the appropriate space in Table 1. Make a copy of this list for a record. Retain the information for future reference.

The top level part numbers in the Parts Manual for the engine are listed with the engine arrangement number. Occasionally, an arrangement may be slightly modified before the product is shipped from the factory. In these cases, a modification number indicates that the arrangement has been modified.

The packaging arrangement may also be called a pricing arrangement or a customer arrangement. This is the total package with attachments and options that are not included in the engine arrangement.

Table 1
Reference Numbers    
Engine Model        
Engine Serial Number        
Engine Arrangement Number        
Packaging Arrangement        
Engine Low Idle rpm        
Engine Power Rating        
Engine Full Load rpm        
Performance Specification Number        
Governor Group Number        
Turbocharger        
Primary Fuel Filter        
Secondary Fuel Filter        
Engine Oil Filter        
Air Cleaner        
Capacity of the Lubrication System        
Capacity of the Cooling System        

Caterpillar Information System:

3044C Industrial Engine Reference Material
G3500B Engines Ignition System - 20 Cylinders
3044C Industrial Engine Cooling System Coolant Level - Check
3044C Industrial Engine Engine Oil Level - Check
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C4.4 (Mech) Industrial Engine Valve Guide - Inspect
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft Pulley
3044C Industrial Engine and Engines for Caterpillar Built Machines Flywheel
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Input/Output Daughter Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Zig Zag Controller Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Parallel Cabinet Controller Board - Remove and Install
3046 Engine for Caterpillar Built Machines Engine Oil Pressure - Test
3046 Engine for Caterpillar Built Machines Engine Oil Pump - Inspect
C7 On-Highway Engine Fuel Priming Pump - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Inspect
C7 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C18 Generator set and C18 Marine Engines Heat Exchanger - Disassemble - Without Fuel Cooler
C7 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3304 and G3306 Engines Engine Oil Cooler - Remove
C7 On-Highway Engine Flywheel Housing - Remove and Install
G3304 and G3306 Engines Engine Oil Cooler - Install
C7 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7 Engines for Combat and Tactical Vehicles Sensors and Electrical Connectors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.