Flywheel
Flatness of friction surface of the flywheel
- Maximum at assembly ... 0.15 mm (0.0059 inch)
- Repair limit ... 0.50 mm (0.020 inch)
Face and bore runout's of flywheel
- Maximum at assembly ... 0.15 mm (0.0059 inch)
- Repair limit ... 0.50 mm (0.020 inch)
Show/hide table
 | |
| Illustration 1 | g00988073 |
(1) Tighten the bolts for the flywheel to the following torque. ... 79 to 88 N·m (58 to 65 lb ft)
Caterpillar Information System:
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply System Input/Output Daughter Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Zig Zag Controller Board - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Parallel Cabinet Controller Board - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Gear Group (Front)
3044C Industrial Engine and Engines for Caterpillar Built Machines Front Housing and Covers
2003/04/01 The Procedure for Shipping Service Manuals has Changed {0374}
3044C Industrial Engine and Engines for Caterpillar Built Machines Piston and Rings
3044C Industrial Engine Emergency Stopping
3612 and 3616 Engines Fuel Pressure Control Valve - Front Mounted Turbocharger
3044C Industrial Engine Stopping the Engine
3044C Industrial Engine and Engines for Caterpillar Built Machines Connecting Rod
3044C Industrial Engine Engine Description
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft Pulley
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
C4.4 (Mech) Industrial Engine Valve Guide - Inspect
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3044C Industrial Engine Engine Oil Level - Check
3044C Industrial Engine Cooling System Coolant Level - Check
G3500B Engines Ignition System - 20 Cylinders
3044C Industrial Engine Reference Material
3618 Engine Reference Information
3046 Engine for Caterpillar Built Machines Engine Oil Pressure - Test
3046 Engine for Caterpillar Built Machines Engine Oil Pump - Inspect
C7 On-Highway Engine Fuel Priming Pump - Remove and Install