G3306 Engine Caterpillar


Cooling System Coolant Sample (Level 2) - Obtain

Usage:

G3306 CNR


KENNISGEVING

Gebruik steeds een speciale pomp voor het nemen van oliemonsters en een speciale pomp voor het nemen van koelvloeistofmonsters. Als u dezelfde pomp voor beide typen monsters gebruikt, kunnen de genomen monsters verontreinigd raken. Deze verontreiniging kan een verkeerde analyse en een incorrecte interpretatie tot gevolg hebben wat bij zowel dealers als klanten vragen kan oproepen.




Illustratie 1g00811362

Raadpleeg de Bedienings- en onderhoudshandleiding, "Toegangsluiken" voor de plaats van de onderhoudspunten.

Neem het monster van de koelvloeistof zo dicht mogelijk bij het aanbevolen monsterafname-interval. Benodigdheden voor het nemen van monsters kunt u bij uw Caterpillar dealer verkrijgen.

Raadpleeg de Bedienings- en onderhoudshandleiding , "Coolant Sample (Level 1) - Obtain" voor de richtlijnen voor de juiste manier om een koelvloeistofmonster af te nemen.

Dien het monster in voor analyse van niveau 2.

Raadpleeg Speciale publicatie, SEBU6250, "Caterpillar Machine Fluids Recommendations (Aanbevolen vloeistoffen voor Caterpillar machines)" of uw Caterpillar dealer voor meer informatie over koelvloeistofanalyse.

Caterpillar Information System:

G3306 Engine Cooling System Coolant Sample (Level 1) - Obtain
320C U Excavator Hydraulic System Oil Sample - Obtain
C9 Marine Engines Engine Cranks but Will Not Start
G3520B Engines MID 033 - CID 0168 - FMI 02 System Voltage intermittent/erratic
322B L and 325B L Excavators, 322B and 325B Forest Machines and 325B Material Handler Swing Drive Oil Sample - Obtain
G3606 and G3608 Engines Gas Engine Ignition - Bio-Gas Fuel
C1.5 and C2.2 Generator Sets Auxiliary Water Pump (Rubber Impeller) - Inspect
G3600 Engines Gas Engine Ignition - Bio-Gas Fuel
3054E Industrial Engine Water Temperature Regulator - Remove and Install
3044C Industrial Engine Fuel and the Effect from Cold Weather
3054E Industrial Engine Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine for Combat and Tactical Vehicles Cooling System
C11, C13 and C15 On-highway Engines Cooling Fan Circuit and A/C High Pressure Switch Circuit - Test
3056E Industrial Engine Vibration Damper - Check
3056E Industrial Engine Belt Tension Chart
3056E Industrial Engine Connecting Rod - Inspect
C15 On-Highway Engines Electronic Control System Components
C11, C13 and C15 On-highway Engines 0166-14 Rated Engine Power Special Instructions
3054E Industrial Engine Camshaft Gear - Remove and Install
C15 On-Highway Engines Air Inlet and Exhaust System
C11 and C13 Engines for Caterpillar Built Machines Basic Engine
C9 Marine Engines Low Power/Poor or No Response to Throttle
3054C Industrial Engine Idler Gear - Remove and Install - Delphi DP210 Fuel Injection Pump
C15 On-Highway Engines Basic Engine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.