2005/02/28 Caterpillar


Addition to Specifications "Valve Mechanism" {1123}

Usage:

3516B 1NW
Caterpillar Products: All
  • 3500B Engines
    Engine:
    3508 (S/N: CNF1-UP; CAW1-UP; 95Y1-UP; 23Z1-UP; 68Z1-UP; 70Z1-UP; 1JZ1-UP)
    3512 (S/N: CMJ1-UP; FDR1-UP; 49Y1-UP; 24Z1-UP; 65Z1-UP; 67Z1-UP; CTE1-UP; 1KZ1-UP)
    3516 (S/N: CMD1-UP; CAL1-UP; GZR1-UP; GZX1-UP; 25Z1-UP; 27Z1-UP; 71Z1-UP; 73Z1-UP; CTD1-UP; 1LZ1-UP)
    Power Module:
    PM3508 (S/N: BPY1-UP)
    PM3512 (S/N: BRF1-UP)
    PM3516 (S/N: CAC1-UP)
  • Service Manual Module, RENR2200, "Specifications"Service Manual Module, RENR2207, "Specifications"Service Manual Module, RENR2217, "Specifications"Service Manual Module, RENR2296, "Specifications"Service Manual Module, RENR4907, "Specifications"Service Manual Module, RENR4927, "Specifications"Service Manual Module, RENR4937, "Specifications"Service Manual Module, RENR4942, "Specifications"Service Manual Module, RENR4946, "Specifications"Service Manual Module, RENR4952, "Specifications"Service Manual Module, RENR4956, "Specifications"Service Manual Module, RENR4962, "Specifications"Service Manual Module, RENR5077, "Specifications"Service Manual Module, SENR2351, " Specifications"Service Manual Module, SENR2361, "Specifications"Service Manual Module, SENR5077, "Specifications"Service Manual Module, SENR5087, "Specifications"Service Manual Module, SENR5097, "Specifications"Service Manual Module, SENR6562, "Specifications"

    The sleeve bearing in the rocker arm on the above 3500B and 3500 Engines has changed. The above listed service modules are affected by this change. Update your manuals in order to reflect the change.

    The 123-4271 Sleeve Bearing has been cancelled and replaced by the new 230-2620 Sleeve Bearing. Add the following information to your manuals.

    Bore in the bearings for the rocker arm shaft

    123-4271 Sleeve Bearing ... 45.056 ± 0.015 mm (1.7739 ± 0.0006 inch)
    230-2620 Sleeve Bearing ... 45.077 ± .015 mm (1.7747 ± 0.0006 inch)

    Caterpillar Information System:

    Installation and Initial Start-Up Procedure for G3500C and G3500E Generator Set Engines {1000, 1000, 1264, 1408} Installation and Initial Start-Up Procedure for G3500C and G3500E Generator Set Engines {1000, 1000, 1264, 1408}
    Installation of New Mounting Hardware for Caterpillar Ignition System (CIS) Modules{1550, 1550} Installation of New Mounting Hardware for Caterpillar Ignition System (CIS) Modules{1550, 1550}
    3056E Industrial Engine Fuel Filter Base - Remove and Install
    C18 Generator set and C18 Marine Engines Alternator - Remove and Install
    2002/11/01 The New 213-9285 Valve Recession Tool Kit Is Available {0703}
    G3408C and G3412C Engines Valve Mechanism
    2003/01/06 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
    2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
    2003/03/01 New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
    3056E Industrial Engine Camshaft - Remove and Install
    2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
    2003/04/01 New Water Pumps for 3500 Engines {1361, 1389}
    C7 On-highway Engine Piston Cooling Jet
    Cold Weather Recommendations for All Caterpillar Machines Fluid Recommendations
    C7 On-highway Engine Turbocharger
    3056E Industrial Engine Fuel Transfer Pump - Remove and Install
    Cold Weather Recommendations for All Caterpillar Machines Cold Weather Information
    3054E Industrial Engine Flywheel
    Cold Weather Recommendations for All Caterpillar Machines Engine Starting Information
    Cold Weather Recommendations for All Caterpillar Machines Engine Starting with Starting Aid
    Cold Weather Recommendations for All Caterpillar Machines Engine Starting with Jump Start Cables
    Cold Weather Recommendations for All Caterpillar Machines Engine Starting with Auxiliary Start Receptacle
    Cold Weather Recommendations for All Caterpillar Machines Engine and Machine Warm-Up
    Cold Weather Recommendations for All Caterpillar Machines Parking
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.