1980/12/22 Caterpillar


New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}

Usage:


D346 (73X1125-Up),
D348 (98S1762-Up) Vehicular Engines;
D348 (57K1287-Up),
D349 (32R447-Up) Off-Highway Truck Engines;
641B, 651B, 657B, 776, D10 Tractors;
777 Trucks

Description of Change: A new gasket is used between the front and rear sections of the oil pans on the above models. The new gasket has a silicone bead to give a better seal than the former gasket.

Adaptable As: The new 1W1403 Gasket can be used as a direct replacement for the former 7N6670 Gasket for the above models.

Caterpillar Information System:

1980/12/22 Exhaust Elbow Support Improved{1059,1061}
1980/12/22 Tires Are Filled With Nitrogen (N2){4203}
1980/12/22 6V4019 Camshaft Pilot Group Is Available{0622,1210,1211,1201}
1980/12/15 Replacement Timing Belts And Variable Belt For Fuel Injection Test Benches Available From Caterpillar{0652,1250}
1980/12/15 New Turbocharger, Turbocharger Oil Lines Group And Aftercooler Air Lines Group Used{1052,1058,1063,1307,1309}
1980/12/15 New Control Valve Group Used To Prevent Ratchet-Type Noise And Rough Clutch Engagement{3313}
1980/12/15 Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15 New Bearing Sizes And Identification Codes For AiResearch Remanufactured Turbocharger Cartridges{1053}
1980/12/01 6V4085 Torque Multiplier Group Available{0614}
1980/12/01 Inspect All Engine Oil And Fuel Filter Elements Before Installation{1000,1261,1318}
1980/12/01 Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01 New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/22 Wrong Turbocharger Group Shown In Parts Book{1052,0374}
1981/01/12 Improvements Made To 5P9718 And 6V186 Disc Pads Used During Gasket Removal{0675,0670}
1981/01/19 New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19 Thicker Layer Of Chrome Now Used On Governor Spring Guide To Extend Its Service Life{1264}
1981/01/19 6V3141 And 6V3142 Puller Plates Available For Removal Of Tube And Gland From Front Suspension Groups{7201,0621}
1981/01/19 Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19 New Sure Seal Electrical Connectors Used In Electrical Wiring Harnesses; Use 6V3000 Seal Repair Kit To Repair Sure Seal Electrical Connectors{0611,1408}
1981/01/19 Be Sure You Assemble The Turbocharger Lubrication Valve Correctly{1309,1052,1300}
1981/01/26 Ways To Prevent Damage To Spark Ignited Industrial Engines When Hydrogen Sulfide Is Present In The Fuel{1000,1280,1318,1350}
1981/01/26 Improved Tach Drive Adapter Has Step In Shaft To Keep Coupling Engaged{0651,0653}
1981/01/26 6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines{0650,1000}
1981/01/26 Use Scheduled Oil Sampling To Find Change Intervals For Hydraulic Oil{5068}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.