3056E Industrial Engine Caterpillar


Air Inlet Heater

Usage:

3056E 356


Illustration 1g00884774
Air inlet heater for top mounted turbocharger


Illustration 2g00884777
Air inlet heater for side mounted turbocharger

(1) A suitable locking compound must be applied to the threads of the air inlet heater. The compound that is used on the threads of the air inlet heater must be able to fill the space between the threads and the compound must also be resistant to oil.

Note: There is no specific torque for the air inlet heater.

Tighten the air inlet heater into the inlet manifold. ensure that the air inlet heater has one thread or less remaining.

(2) Check that the electrical terminal is in the correct position.

Allow the compound to harden.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.