Refill Capacities
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. Refer to the Operation and Maintenance Manual, "Maintenance Section" for more information on Lubricant Specifications.
Show/hide table
| 3054E Industrial Engine | ||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Standard Oil Sump for the Engine Crankcase(1) | 7.3 | 8 |
Show/hide table
| (1) | These values are the approximate capacities for the crankcase oil sump which include the standard factory installed oil filters. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
Show/hide table
| 3056E Industrial Engine | ||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Standard Oil Sump for the Engine Crankcase(1) | 13.1 | 14 |
Show/hide table
| (1) | These values are the approximate capacities for the crankcase oil sump which include the standard factory installed oil filters. Engines with auxiliary oil filters will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. |
To maintain the cooling system, the Total Cooling System capacity must be known. The approximate capacity for the engine cooling system is listed below. External System capacities will vary among applications. Refer to the OEM specifications for the External System capacity. This capacity information will be needed in order to determine the amount of coolant/antifreeze that is required for the Total Cooling System.
Show/hide table
| 3054E Industrial Naturally Aspirated Engine | ||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Engine Only | 10.4 | 11 |
| External cooling system capacity (OEM recommendation) (1) | ||
| Total Cooling System(2) | ||
Show/hide table
| (1) | The external cooling system includes a radiator or an expansion tank with the following components: heat exchanger, aftercooler and piping. Refer to the Caterpillar specifications and/or the OEM specifications. Enter the value for the external system capacity in this row. |
| (2) | The Total Cooling System includes the capacity for the engine cooling system plus the capacity for the external cooling system. Enter the total in this row. |
Show/hide table
| 3054E Industrial Turbocharged Engine | ||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Engine Only | 11.4 | 12 |
| External cooling System capacity (OEM recommendation)(1) | ||
| Total Cooling System(2) | ||
Show/hide table
| (1) | The external cooling system includes a radiator or an expansion tank with the following components: heat exchanger, aftercooler and piping. Refer to Caterpillar specifications and/or the OEM specifications. Enter the value for the external cooling system capacity in this row. |
| (2) | The Total Cooling System includes the capacity for the engine cooling system plus the capacity for the external cooling system. Enter the total in this row. |
Show/hide table
| 3056E Industrial Turbocharged Engine | ||
|---|---|---|
| Compartment or System | Liters | Quarts |
| Engine Only | 15.1 | 16 |
| External cooling System (OEM recommendation)(1) | ||
| Total Cooling System(2) | ||
Show/hide table
| (1) | The external cooling system includes a radiator or an expansion tank with the following components: heat exchanger, aftercooler and piping. Refer to Caterpillar specifications and/or the OEM specifications. Enter the value for the external cooling system capacity in this row. |
| (2) | The Total Cooling System includes the capacity for the engine cooling system plus the capacity for the external cooling system. Enter the total in this row. |
Caterpillar Information System:
C-10, C-12 and C-15 On-Highway Engines Diagnostic Flash Code Retrieval
C-10, C-12 and C-15 On-Highway Engines Sensors and Electrical Components
2002/04/01 A New Water Pump Shaft Is Available {1361}
3406E, C-10 and C-12 Truck Engines Cold Start Strategy
C-10, C-12 and C-15 On-Highway Engines Gauges and Indicators
3406E, C-10 and C-12 Truck Engines Reference Material
C-10, C-12 and C-15 On-Highway Engines Serial Number Plate
C-10, C-12 and C-15 On-Highway Engines Engine Description
C-10, C-12 and C-15 On-Highway Engines Model View Illustrations
3406E, C-10 and C-12 Truck Engines Fuel System Secondary Filter - Replace
3406E, C-10 and C-12 Truck Engines Fuel System - Prime
G3500B Engines Cooling System - Power Module
C-10, C-12 and C-15 On-Highway Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3500 Engines Mechanical Gauge - Test - Water Temperature
C13 and C15 On-Highway Engines Engine Oil Level - Check
3406E, C-10 and C-12 Truck Engines Sensors and Electrical Components
C-10, C-12 and C-15 On-Highway Engines Engine Oil Level Gauge - Calibrate - C-15 Truck Engines Only
G3500B Engines Valve Data Sheet
C-10, C-12 and C-15 On-Highway Engines Engine Oil and Filter - Change
C-10, C-12 and C-15 On-Highway Engines Fuel System - Prime
C-10, C-12 and C-15 On-Highway Engines Fuel System Secondary Filter - Replace
3412E, C30 and C32 Marine Engines Coolant Temperature Is Too High
2002/04/01 A New Housing Assembly Includes Improved Bearings For The Fresh Water Pump {1361}
3412E, C30 and C32 Marine Engines Engine Cranks but Will Not Start