Improved 2P2342 Hose Group Is Available For Beadless Tires{0611,4211}
Usage:
The manifold assembly has been removed and three nipples, three needle valves and a hydraulic cross fitting have been added to the 2P2342 Hose Group. The parts in this hose group are serviced separately. This permits the new parts to be used as replacement parts for your current hose group. The parts in the improved 2P2342 Hose Group are shown in the chart.
The 2P2342 Hose Group is used during installation of the rims in the carcass for Beadless Tires.
Improved 2P2342 Hose Group.
Caterpillar Information System:
1980/06/23 Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System{1305,1318}
1980/06/16 Timing Groups To Be Canceled{0654,1250}
1980/06/16 6V3075 Dial Indicator (Metric) Is Available{0653}
1980/06/16 6V3115 Repair Kit Is Available{0611,1380,1353}
1980/06/09 Check For Short Circuit In Rotor Field Windings If Low AC (Alternating Current) Voltage Is A Problem{4455,4457}
1980/06/09 6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/02 New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02 Oil Pump Drive Sleeves Now Available Separately For Parts Service{3300}
1980/06/02 Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02 Improved Procedure Can Be Used To Adjust Voltage Gain{4467}
1980/05/26 6V6 Electrical Connector Pliers Available{0613}
1980/05/26 Four Fabricated Tools Available To Adjust Carrier Bearing Preload And Backlash (Tooth Clearance) For Bevel Gear And Pinion{0611,3258,3256,3257}
1980/06/23 Check Retainer Screw Depth In Plastic Pads Of 5P8637 Crankshaft Support Groups{0665}
1980/06/23 In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units{1230,1203,1219}
1980/06/23 Do Not Add Caterpillar Cooling System Conditioner (Corrosion Inhibitor) To New Machines Before Delivery; Cooling System Conditioner Service Interval Changed{1350}
1980/06/23 Check Journal Hardness On Reground Crankshafts{1202,1203,1219,1230}
1980/06/23 Follow Correct Procedures For Installation Of Fuel Filters And Priming The Fuel Systems{1261,1258}
1980/06/30 Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/06/30 New Planetary Group Has Gears Which Operate With Lower Noise Levels{3301,3304}
1980/07/14 Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14 Two New Front Power Take-Off Groups Are Available{3055}
1980/07/14 Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/08/04 New Bend Specification For Used Or Field Reground Crankshafts{1202}
1980/08/04 The Service Publications Information Feedback System{0374}