Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
- Mini Hydraulic Excavator
- 308E2 CR (S/N: FJX1-UP)
Description Of Change: Improved electrical grounding is now used on certain 308E2 CR Mini Hydraulic Excavators. A ground strap is added between the cab and operator platform to improve electrical ground reliability.
Adaptable To:
Show/hide table
Parts List | ||
---|---|---|
Qty | New Part Number | Part Name |
1 | Ground Strap |
Show/hide table
Improved Electrical Grounding | ||
---|---|---|
Sales Model | Effective with S/N | Adaptable to S/N |
308E2 CR | S/N:FJX1-3999,4002,4005,4007-4008,4010-4012,4014-4015,4017,4025-4027,4029-4032,4035,4037-4040,4042-4043,4045-4046,4048-UP | S/N:FJX4000-4001,4003-4004,4006,4009,4013,4016,4018-4024,4028,4033-4034,4036,4041,4044,4047 |
Installation Procedure
Show/hide table
Illustration 1 | g06026232 |
(1) (2) Bolt (3) Washer |
- Locate and remove two bolts (2) and two washers (3) from harness ring terminals. Move harness ring terminals away from ground boss.
- Install ground strap (1) with flat side of terminal directly to boss and threaded hole.
- Reinstall existing harness ring terminals on top of ground strap (1) terminals.
- Reinstall two washers (3) and two bolts (2) and tighten to
33 ± 4 N·m (24 ± 3 lb ft) . - Perform "Functional Check".
Functional Check
- Turn on the dome lamp, work light, wiper motor, and radio (if equipped).
- Turn on A/C and set blower motor to high speed.
- Observe cab components turned on in Step 1 for any malfunction. If components function correctly, the installation was successful. If not, review the installation steps.
Caterpillar Information System:
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380} An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
323F Excavator Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
349F XE and 352F XE Excavators Engine Oil Level - Check
New Special Instruction to Clean the Valve Body and the Front Head of H95E S Hydraulic Hammers Is Now Available {5071, 5077} New Special Instruction to Clean the Valve Body and the Front Head of H95E S Hydraulic Hammers Is Now Available {5071, 5077}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117} Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502} A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
349D2 MHPU Mobile Hydraulic Power Unit Machine System Counterweight - Standard
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Soilmec
349D2 MHPU Mobile Hydraulic Power Unit Machine System Counterweight - Soilmec
C9.3 Engine for Caterpillar Built Machines Crankshaft
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Standard
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump