Track
Show/hide table
| |
| Illustration 1 | g02725196 |
Show/hide table
| Specification for 383-4238 Track Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
| Use the following procedure to tighten the track bolts: | |||
| 1. Tighten the track bolts to |
|||
| 2. Tighten the standard track bolts to an extra turn of 120 ± 5 degrees. | |||
| 3. Tighten the master link bolts to an extra turn of 180 ± 5 degrees. | |||
| - | - | - | The maximum assembly force for the track link assembly is |
| - | - | - | The reference setting force is |
| A | - | - | Distance between the bolt holes is |
| B | - | - | Distance between the bolt holes is |
| C | - | - | Distance between the bolt holes is |
| D | - | - | Distance between the bolt holes is |
| E | - | - | Protrusion at one end of the pin is |
Show/hide table
| |
| Illustration 2 | g02725198 |
|
View of area F | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| G | - | - | Distance from the end of the plug (1) to the surface of the stopper (2) is |
| H | - | - | Distance from the end of the pin (3) to the surface of the stopper (2) is |
| - | - | - | The plug (1) must not be recessed below the surface of the stopper (2) after assembly. |
| End play for the link assemblies is |
Caterpillar Information System:
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805} New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
349F XE and 352F XE Excavators Engine Oil Level - Check
New Special Instruction to Clean the Valve Body and the Front Head of H95E S Hydraulic Hammers Is Now Available {5071, 5077} New Special Instruction to Clean the Valve Body and the Front Head of H95E S Hydraulic Hammers Is Now Available {5071, 5077}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803} New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101} {0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
538, 548 and 558 Forest Machine System Schematic
New Thicker Front Windows are Now Available for Certain Forestry Machines {7310} New Thicker Front Windows are Now Available for Certain Forestry Machines {7310}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Shipping
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Control Valve - Mounting
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Position Sensor
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091} Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Position Sensor
323F Excavator Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380} An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301} Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117} Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502} A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
349D2 MHPU Mobile Hydraulic Power Unit Machine System Counterweight - Standard