Upper Frame - Standard
Show/hide table
| |
| Illustration 1 | g06026027 |
Show/hide table
| Specification for 376-4594 Upper Frame | |||
| Item | Qty | Part | Specification Description |
| Before assembly, use 5P-0960 Grease Cartridge to coat all the pin bores. | |||
| 1 | As required, use the following shims to adjust the minimum lateral clearance to the maximum of |
||
| 1 | 308-8772 Shim | Thickness is |
|
| 2 | 308-8773 Shim | Thickness is |
|
| 1 | 308-8774 Shim | Thickness is |
|
| 2 | As required, use the following shims to adjust the minimum lateral clearance to the maximum of |
||
| 2 | 133-2428 Shim | Thickness is |
|
| 4 | 4I-0575 Shim | Thickness is |
|
| 2 | 4I-0577 Shim | Thickness is |
|
| 3 | 2 | 4I-4996 Pin As | Diameter is |
| 4 | 1 | 234-3942 Pin As | Diameter is |
| A | - | - | Clearance between the pin end and the side of the cab must be kept over |
Caterpillar Information System:
C9.3 Engine for Caterpillar Built Machines Crankshaft
349D2 MHPU Mobile Hydraulic Power Unit Machine System Counterweight - Soilmec
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Soilmec
349D2 MHPU Mobile Hydraulic Power Unit Machine System Counterweight - Standard
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502} A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117} Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301} Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063} Higher Torque Specification is Now Used on the Swing Gear and Bearing Bolts for Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380} An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump
An Improved Window Position Switch is Now Used on Certain Excavators {7310} An Improved Window Position Switch is Now Used on Certain Excavators {7310}
538, 548 and 558 Forest Machine Connector Contact Description
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Pump and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mounting Bracket - Control
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620} New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Steering)