- Engine:
- G3606 (S/N: 3XF341-UP)
- G3608 (S/N: 4WF233-UP)
Description of Change: A two-piece clip is now used to retain the tube assemblies in the Hydrax system on G3606 and G3608 Engines. The two-piece clips secure the hydraulic lines in the Hydrax system. The clips prevent the hydraulic lines from vibrating against the bracket for the air choke actuator. The two-piece clips are made of thicker steel than the former one-piece clip.
Adaptable To: The two-piece clip can be installed on any of the G3606 and G3608 Engines that use the Hydrax system. The two-piece clip is adaptable to the engine serial numbers that are shown below:
- G3606 3XF114-UP
- G3608 4WF68-UP
Table 1 indicates the Engine Arrangement Numbers and the Engine Oil Lines Groups that are involved.
Engine Model     | Arrangement Number     | Engine Oil Lines Group     | Configuration Data     |
G3606     | 7C-4106     | 142-5067 Engine Oil Lines Gp     | VTC54 Turbocharger     |
G3606     | 176-3606     | 149-3931 Engine Oil Lines Gp     | TSP57 Turbocharger     |
G3608     | 7C-4108     | 141-9902 Engine Oil Lines Gp     |     |
Illustration 1 | g00841158 |
This is a 5K-9660 Clip . |
The 8T-1887 Clip and the 8T-1888 Clip must be used together in order to replace the former 5K-9660 Clip.
Illustration 2 | g00841569 |
This Illustration shows the assembly of a 8T-1887 Clip and a 8T-1888 Clip . |
In this installation, 4 of the 8T-1887 Clips and 4 of the 8T-1888 Clips are required to fasten the tube assemblies to the 130-3357 Bracket. The bracket is used in order to mount the air choke actuator to the engine. The hardware for mounting the clips is reusable.
Illustration 3 | g00842073 |
This is an illustration that shows the tube assemblies for the Hydrax system. (1) 8T-1887 Clips (1) 8T-1888 Clips (2) Oil drain line for the Hydrax system. (3) Oil supply line for the Hydrax system. (4) 130-3357 Bracket |