Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
| |
| Illustration 1 | g00798126 |
|
Engine speed/timing sensor in the front cover of the governor drive (G3406 Engine) | |
- Remove the sensor from the cover. Check the condition of the end of the magnet. Check for contaminants.
- Clean the metal shavings and other debris from the face of the magnet.
- Install the sensor and adjust the sensor according to the engine's Specifications.
Caterpillar Information System:
Electronic Modular Control Panel II (EMCP II) For MUI Engines Typical Generator Abbreviations
Electronic Modular Control Panel II (EMCP II) For MUI Engines Symbols
Electronic Modular Control Panel II (EMCP II) For MUI Engines Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Reading DC Schematics
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 441 FMI 12 Electronic Governor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Alarm Modules
Electronic Modular Control Panel II (EMCP II) For MUI Engines SP Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines AL Fault Codes
Electronic Modular Control Panel II (EMCP II) For MUI Engines Engine Setpoint Verification OP9
Electronic Modular Control Panel II (EMCP II) For MUI Engines Spare Input/Output Programming OP6
3126B and 3126E On-highway Engines Cooling Fan Circuit and A/C Compressor Clutch Circuit - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines Sensors
3408E and 3412E Engines for Caterpillar Built Machines General Information
3408E and 3412E Industrial Engines Electronic Control System Components
Machine Security System Electronic Control Module (ECM) - Flash Program
2001/11/01 A Two-Piece Clip is now used to Retain the Tube Assemblies in the Hydrax System {1264, 1307}
2001/11/01 The Content Of The 9U-5105 Basic Engine Tool Group Has Changed {0701}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front)
3054 and 3056 Engines 550 Generator Set Control Panel General Information
Machine Security System Factory Password - Obtain
3054 and 3056 Engines 550 Generator Set Control Panel Automatic Operation
SPT343 Truck Mounted Pumper Junction Box
3054 and 3056 Engines 550 Generator Set Control Panel Normal Operation
3054 and 3056 Engines 550 Generator Set Control Panel Alarm Operation