Fuel Filter Base - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put fuel filter base (2) and fuel filter (6) in position on the engine as a unit.
Show/hide table
Illustration 1 | g00803207 |
- Install bolts (7) and nuts (8) that hold fuel filter base (2) in position on the engine. Tighten the bolts and nuts to a torque of 22 N·m (16 lb ft).
- Connect fuel line (1) and two fuel lines (3) to fuel filter base (2) .
Show/hide table
Illustration 2 | g00803192 |
- Connect fuel lines (5) to the fuel filter base (2) .
- Install fuel filter (6), as follows:
- Replace the seal (not shown) on fuel filter base (2) .
- Insert fuel filter (6) into fuel filter base (2) .
- Install locking collar (4). Turn locking collar (4) in a clockwise direction in order to lock fuel filter (6) in position.
Note: If the fuel filter was not removed from the fuel filter base, skip Step 5.
Caterpillar Information System:
Generator Set Start Module System Description
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Oil Filter (Hydraulic)
3034 Marine Engine Fuel Filter Base - Remove
Wabco Air Compressors Cylinder Head - Remove
SPS342 Skid Mounted Pumper Starting the Engine
SPS342 Skid Mounted Pumper Before Starting Engine
Generator Set Start Module Acronyms
Wabco Air Compressors Excessive Oil at Exhaust Ports or Air Strainer
Installation Instructions for Jacket Water Heaters with Seal Kits{1383} Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
2001/07/01 Reference For Springs For The Pneumatic Speed Control Setting On Woodward 3161 Governors {1915}
C-9 Engine for the 12H Motor Grader Excessive White Smoke
G3600 Engines Exhaust Manifold
3034 Marine Engine Fuel Injection Lines - Remove and Install
2001/06/01 New Stainless Steel Aftercooler Core Assemblies Provide Longer Life In Landfill Applications {1064}
Wabco Air Compressors Cylinder Head - Install
G3500 Engines Air Starting Motor
G3304 and G3306 Engines Engine Crankcase Pressure (Blowby) - Test
G3304 and G3306 Engines Boost Control Valve
G3304 and G3306 Engines Gas Pressure
3034 Marine Engine Air Cleaner - Remove and Install
Programming ECM Governor Gain Parameters{1901, 1908} Programming ECM Governor Gain Parameters{1901, 1908}
3034 Marine Engine Electrical System
G3304 and G3306 Engines Engine Valve Lash - Inspect/Adjust
G3304 and G3306 Engines Engine Oil Pressure - Test